Coffee review

How to install the SM85E coffee machine?

Published: 2025-08-21 Author: World Gafei
Last Updated: 2025/08/21, How to install the SM85E coffee machine? This is a difficult problem for many non-professional users. In order to reduce the cost, many people who buy coffee machines want to install them themselves to reduce their installation costs. Below, the author will share with you the basic methods of installing a SM85E coffee machine.

one。 Installation and cleaning of water softener

DVA water softener is a kind of reducible water softener, which should be cleaned after installation for the first time.

Installation steps: first connect the tap water to the upper inlet of the water softener, open the lower discharge valve, and then open the upper valve of the water softener to allow tap water to flow freely through the water softener. The first time you use the water softener, you will release a lot of yellow water, which can be connected to the coffee machine in about ten minutes.

Water softener reduction

two。 Coffee machine installation

Put the machine in the position to be placed (about 1 meter should have an inlet and outlet pipe, an independent 220V 3000W power supply, and the countertop can bear a load of 150 jin). Open the machine water tray and install the waste water pipe (keep the waste water pipe to the bar sewer smoothly). Connect the inlet pipe of the coffee maker to the lower outlet of the water softener and open the valve to allow the softened water to enter the coffee machine freely (remember to clean the water softener the first time you use the water softener). If there is no problem with the above steps, you can turn on the coffee machine power switch to "1" to do automatic water replenishment action. If there is no water in the new machine boiler, do not directly turn the switch to "2" to do the action of heating and replenishing water, which will cause the heating wire to dry burn out. When you turn to "1" to make up the water automatically (after the coffee machine has no motor turning sound, turn the switch to "0" for 5 seconds and then turn to "1" to make sure the motor is not turning). You can turn the switch to "0" and then turn to "2" to heat the water in the coffee machine boiler. When the boiler pressure above the coffee machine pressure indicator reaches about 1, you can use coffee and make coffee (this process may take about 20 minutes).

In short, want to make a good cup of coffee, and coffee machine, coffee beans, baristas have a lot of relationship, for the installation of SM85E coffee machine on the above two points, I hope to help you.

0