Coffee bubble pull flowers when push not open-coffee machine to play milk bubble how to pull flowers
Coffee foam can't be pushed open when pulling flowers.-how do you pull flowers when you hit the coffee machine?
The milk foam is not ready, it's the steam. The author believes that the steam pressure of the coffee machine (that is, boiler pressure) is relatively easy to grasp in 0.8BAR, this pressure is very long, and it is easy to understand the principle of milk foaming, but it takes about 13 seconds to make a cup of milk foam, ah, not as fast as the pressure. If the air pressure is 1. 0 or 1.1BAR, the way and method of bubbling will change, but the principle is the same. (at this point, it is necessary to rule out the phenomenon of "vomiting" caused by impure steam, and the flower jar is also shaking violently. If this happens, please empty the steam and try to heat it fully again.)
Is the milk and milk foam, how to mix it well, pull flowers, a pour is not all white? Temperature. Temperature is important. When you foam, put your empty hand on the flower cup to feel the temperature of the milk. When you feel very hot and can no longer be placed on the flower jar, it will make the foam too hard. The hard foam looks stiff, and it doesn't mix with the coffee when you pour it into the coffee, but accumulates on top of your coffee like fluffy beaten cream. If you play a little longer, it will be layered, 90% of which is flowing milk, and a thick hard foam lid floating on it. When you pour it into the coffee, the milk will flow out of the flower cup first. So if you want to mix milk and foam well, temperature is the key. Do not put the foam for too long after beating, or it will be stratified.
I use my own local method to make milk foam, and it feels good. The appliance is the electric milk beater, 9.9RMB, which is bought by Yijia. Step: add fresh milk to the glass, heat it in the microwave oven for 45 seconds, stir in the milking machine for 1 minute, and the milk foam will become. I use a French press to filter out the 50ml coffee and pour it directly from the top of the foam. I can see that the coffee is gradually mixed with the milk, and the white foam rises slowly.

- Prev
What kind of milk is not suitable for coffee flowers?-what do coffee flowers need?
Coffee flower is not suitable for what milk is used as a material-what does coffee flower need. Pour the right amount of refrigerated milk into the vat; 2. Air spray cleaning steam stick; 3. Insert the steam stick into the milk to form a foaming angle, and the steam rod outlet is located at 1 cm below the milk level; 4. Dismissal stage: open the steam valve, when the milk starts to rotate, move the milk tank down at a uniform speed, shape
- Next
Relationship between roasting degree Grinding and extraction of hand-brewed Coffee
The relationship between roasting degree, Grinding and extraction of hand-brewed Coffee Coffee is a diversified world. I think hand-brewed coffee is the field that best reflects this characteristic. The role of steaming is to soak the coffee powder and play the role of a bed. There is also a little drop method, which is not stuffy and steaming. If there is a little more water in the process, it is like adding unhealthy coffee liquid, so the individual
Related
- What is the meaning of lactic acid fermentation with coffee bean treatment?
- How to judge the state of foam by sound?
- How does the latte pull out the unicorn pattern? Come to get for a little trick to improve the flower pull!
- Will flower pulling affect the taste of the latte?
- Do you know the history of coffee?
- The difference between honey treatment and sun washing what is raisin honey treatment?
- What kind of milk can a novice use to make coffee foam to keep the foam longer? The correct method and skills of milking tutorial sharing
- Why do washed coffee beans taste sour? Flavor characteristics of washed Coffee
- Introduction to the skill of how to practice the size and height of water injection around the circle of hand-brewed coffee
- How do beginners practice coffee flower drawing from scratch?