Bit by bit | cleaning and maintenance of Italian coffee machine

After installing the filter with blind net, press the coffee making button again, stop after 10 seconds, and wait 5-6 seconds.

Repeat the above operation 4-6 times until the powder dissolves completely.

Remove the filter and rinse clean, do not add powder, reinstall, press the coffee making button, stop after 10 seconds, repeat 4-6 times, put the filter and strainer in hot water (without the filter), add 2-3 grams of powder and soak overnight. Before using the coffee machine the next day, please rinse the filter and screen with clean water, make a cup of coffee to eliminate the residual taste, check the plastic trough (square black plastic box with drain pipe), and if you find any blockage, please remove the coffee residue from the plastic tank. Wipe the water tray dry and replace it, rinse repeatedly with clean water to make sure it is clean and smooth (a full sink should run out of water in 10 seconds).

If the drainage is still slow, loosen the drain hose clip with a screwdriver, remove the hose from the sink, and tap the hose by hand to drain the blockage in the pipe. If the problem still cannot be solved, please ask the service technician to turn off the power and wipe the surface of the machine with a wet towel. Be careful not to wipe the appearance of the machine and the place where the words are sprayed with chemicals such as alcohol.