Coffee review

Operation of hand coffee bean grinder

Published: 2024-11-08 Author: World Gafei
Last Updated: 2024/11/08, Operation of hand coffee bean grinder 1. Suitable for the scene to use hand flushing method, siphon kettle method, pressure kettle method and similar cooking methods recommend the use of hand bean grinder. It is not recommended to use espresso if it is made. 2 the choice of grinding core the movement of hand bean grinder is divided into metal and ceramic. The metal will heat when it is ground, making the aroma of coffee beans volatilize ahead of time; ceramics are fragile.

Operation of hand coffee bean grinder

1. Applicable scenario

Hand flushing, siphon kettle, pressure kettle and similar brewing methods at home are recommended to use a hand grinder. It is not recommended to use espresso if it is made.

2 selection of grinding core

The movement of the hand bean grinder is divided into metal and ceramic. The metal will heat when grinding, making the aroma of coffee beans volatilize ahead of time; the ceramic is fragile, but the ceramic is basically not hot, so the aroma is corrected.

3 Brand introduction

Many people are using the sloshing A12 affordable, Kyocera, HARIO and TIAMO are also good, HARIO shanzhai Kyocera, TIAMO copycat HARIO. The grinding core of HARIO is manufactured by Kyocera, the brand of TIAMO is made in Taiwan, almost all of it is made in the mainland, and the plastic of TIAMO may not be safe. The grinding core of Kyocera CM45 can grind the powder needed by espresso, and I think it is better to grind espresso powder with special electric mill (not the best hand mill, such as HG-ONE).

4 using skills

Hand grinder gives everyone the impression that it is very tired to grind. At present, coffee beans are more popular in the domestic market for medium and deep roasting, and beans are still easy to grind. You can try to sit on the stool, put the bean grinder on your knee, and then start grinding. I usually use this method. It's easy to say, and you don't have to press down hard.

At present, the quantitative system uses time as the counting unit to convert weight. Therefore, even the legendary most accurate mythos one also has some errors. After all, variables are still variables. Powder quantity control, but also rely on the table to calibrate. When the quantitative function is not so reliable, is there any reason for us to buy a quantitative mill? In my opinion, whether the design of the pulverizing channel is reasonable, the loose degree of pulverizing, electrostatic treatment and other functions will be the buyer's secondary demand.

0