How to Fix Common JURA Coffee Machine Errors

If your JURA coffee machine suddenly stops brewing and flashes an error code on the screen, it’s not just annoying—it halts your morning routine. Whether it’s a 'FILL WATER' alert or a cryptic 'ERROR' message, these issues have specific causes and straightforward solutions. This guide walks you through the most frequent JURA error messages, what they really mean, and how to resolve them without a service call.

The key to fixing JURA coffee machine errors is understanding what the screen is telling you. Most issues—like empty water tanks, full grounds containers, or missing filters—are easy to diagnose and fix in under a minute once you know what to look for.

Why Your JURA Coffee Machine Displays Error Messages

JURA machines use on-screen alerts to communicate specific issues, from empty components to maintenance needs. These codes appear when the machine detects a problem such as insufficient water, a full grounds tray, or the need for cleaning or descaling. Recognizing these messages early helps prevent bigger issues and ensures consistent brewing performance.

Common JURA Error Codes and How to Fix Them

1. FILL WATER

This message means your machine has no water to brew. There are two possible causes:

• The water tank is empty.
• The float inside the tank is stuck or faulty.

To fix it:

• Refill the water tank to the maximum level.
• If the error persists after refilling, try wetting the float or descaling the tank to remove mineral buildup.

2. FILL BEANS

This alert shows when the bean hopper is empty—or sometimes even when it isn’t.

• Cause 1: No coffee beans are loaded.
• Cause 2: The machine still shows the alert after beans are added.

Solutions:

• Add fresh coffee beans to the hopper.
• If the message stays after adding beans, brew a shot. The display often resets automatically after one extraction.

3. EMPTY GROUNDS

This warning means the coffee grounds container is full—or was reinserted too soon.

• Cause 1: The used coffee grounds tray is full and needs emptying.
• Cause 2: The tray was put back too quickly after emptying.

Steps to resolve:

• Empty the grounds tray completely.
• Wait at least 10 seconds before putting the tray back into the machine.

4. DRAWER MISSING

This message displays when the grounds drawer isn’t installed or isn’t seated properly.

• Cause: The used coffee grounds container is missing or not clicked into place correctly.

Fix it by:

• Ensuring the grounds drawer is properly aligned and fully pushed into the machine until it clicks into place.

5. CLEAN MACHINE / MACHINE READY

This alert means your coffee machine requires a cleaning cycle.

• Cause: Internal milk systems or brew paths need washing to prevent clogs and maintain flavor quality.

Action: Run the cleaning cycle as instructed in your user manual to flush the system with a dedicated cleaner.

6. DESCALE MACHINE / MACHINE READY

This indicates that limescale has built up and the machine needs descaling.

• Cause: Mineral deposits from water affect heating elements and brew performance.

What to do: Perform a full descaling process using JURA-approved descaling solution to remove scale buildup.

7. CHANGE FILTER / MACHINE READY

This means the water filter needs replacing.

• Cause: Filters lose effectiveness over time and can impact taste and machine function.

Solution: Replace the water filter with a new one according to the manufacturer’s schedule.

8. ERROR

This is a general fault code that can stem from multiple issues.

• Cause: Internal malfunctions, software glitches, or unresolved problems.

How to respond:

• Turn off the machine, unplug it from power for 10–30 seconds, then plug it back in and restart.

Preventative Care Tips

To minimize error messages, follow these best practices:

• Check water and bean levels before each use.
• Routinely empty the grounds tray.
• Use filtered water to reduce descaling frequency.
• Clean milk systems (if applicable) after each use.
• Follow the manufacturer’s maintenance schedule for cleaning and descaling.

Frequently Asked Questions

What does 'FILL WATER' mean on my JURA coffee machine?

'FILL WATER' means the machine has no water to brew. Either the water tank is empty or the internal float is stuck. Refill the tank, and if the error continues, check the float or descale the water compartment to clear mineral blockages.

Why does my JURA still say 'FILL BEANS' after I add coffee?

If the 'FILL BEANS' message stays after adding beans, the machine may need to run a brew cycle to reset the sensor. Add beans and brew an espresso shot—often the display will update automatically afterward.

How do I fix the 'EMPTY GROUNDS' error on my JURA?

The 'EMPTY GROUNDS' alert means the used coffee tray is full or was reinserted too soon. Empty the tray completely, wait at least 10 seconds, then reinsert it firmly until it locks in place.

What should I do if my JURA shows 'ERROR'?

A general 'ERROR' code signals an internal issue. Turn the machine off, unplug it for 10–30 seconds, then plug it back in and turn it on again. This often resets minor glitches.

How often should I descale and clean my JURA coffee machine?

JURA recommends descaling every 200–400 uses depending on water hardness, and running a cleaning cycle regularly—especially if you use milk—to prevent buildup and maintain optimal performance.

Recommended FrontStreet Coffee for Home Espresso

For JURA machine users, FrontStreet Coffee’s Classic Blend delivers balanced body and rich crema, with notes of dark chocolate and caramel—ideal for daily espresso. The Specialty Blend highlights bright berry and floral tones, perfect for those who enjoy a more vibrant cup. Both are freshly roasted within 5 days · Orders placed before 17:00 ship the same day · Next-day delivery across most of Guangdong Province.