Cankun coffee machine dismantled-Cankun 1819a coffee machine leaking

Cankun coffee machine dismantled-Cankun 1819a coffee machine leaking

The coffee machine will also break down in the process of use. the failure of the coffee machine does not mean that the quality of the coffee machine of this product is not good. Now the electrical appliances we use will not have any problems. Let's say yes. When the coffee machine breaks down, we can learn more about its maintenance methods, so that when it goes wrong again, we will not appear to be too flustered.

Semi-automatic coffee machine maintenance

Fault: the machine does not start

Cause of failure:

1. The power is not turned on.

2. The selector is not on.

3. The power connection is incorrect.

Solution:

1. Set the power switch to the position of "NO".

2. Put the selector switch of the coffee machine in the × position.

3. Re-check the power cord of the coffee machine.

Failure: lack of water in coffee machine boiler

Cause of failure:

1. The water source is not turned on.

2. The filter of the coffee machine pump is blocked.

3. The electric pump of the coffee machine does not work.

Solution:

1. Turn on the water tap of the coffee machine again.

2. Change the filter of the coffee machine.

3. The electric pump of the coffee machine can not work and can only be repaired by professional personnel.

Failure: there is no steam discharge from the steam nozzle of the coffee machine.

Cause of failure:

There is too much hot water in the boiler.

2. The heating element of the coffee machine is damaged.

3. The nozzle is blocked.

4. The thermal protector of the heating element of the coffee machine is disconnected.

Solution:

1. When adding water to the boiler, it should be added in accordance with the prescribed amount of water.

2. If the heating element of the coffee machine is damaged, then its heating element needs to be replaced.

3. If the nozzle of the coffee machine is blocked, it should be cleaned in time.

4. If the thermal protector of the heater is disconnected, then its thermal protector needs to be repaired.