Nav: Home > Coffee Supplies >

Nova Oscar coffee machine cleaning instructions in Chinese

Published: 2025-08-21 Author: World Gafei

Last Updated: 2025/08/21, Nova Oscar coffee machine cleaning method 1. Coffee machine body cleaning: wipe the machine body with a wet dishcloth before turning on the machine every day. If you need to use detergent, please spray it on the wet dishcloth and then wipe the fuselage with a mild and non-corrosive detergent (pay attention to the dishcloth should not be too wet, and the cleaning should not be sprayed directly on the fuselage to prevent excess water and detergent from seeping into the circuit system and eroding electricity.

1. Coffee machine body cleaning: wipe the fuselage with a wet dishcloth before starting up every day. If you need to use a cleaner, please spray it on the wet rag and then wipe the fuselage with a mild and non-corrosive detergent (note that the rag is not too wet. Cleaning should not be sprayed directly on the fuselage to prevent excess water and detergent from infiltrating into the circuit system and eroding wires to cause short circuit).

2. Clean the outlet of the cooking head: after closing every day, remove the handle and press the cooking button to rinse down the coffee grounds left in the cooking head and on the filter, and scrub the inside of the cooking head and the washer with a clean brush.

3. Steam stick: after using the steam stick to make milk foam, wipe the steam stick with a clean wet dishcloth and turn on the steam switch again, making use of the impulse and high temperature of the steam itself to automatically clean the residual milk dirt in the air hole to maintain the smooth flow of the air hole; note: turn off the steam at one time to prevent milk from being sucked back into the pipe or boiler.

4. Boiler: in order to prolong the service life of the boiler, if the machine is not used for a long time (more than one month), please turn off the power supply and turn on the steam switch to completely release the pressure in the boiler until the boiler pressure gauge indicates zero. After the steam is no longer ejected, open the boiler drain valve, drain the water inside the boiler, and then clean the water tray and drain.

5. Water plate: clean the water plate before opening or before use.

6. Drain trough: A. remove the water tray and clean the sediment in the drain with a wet rag or napkin, and then rinse with hot water to keep the drain unobstructed; B. if the drainage is poor, pour a spoonful of cleaning powder into the drain and rinse with hot water to dissolve the coffee residue in the drainage pipe. Note: drainage pipes should not be pressed or folded to ensure smooth drainage.