Will the coffee machine grinding knob break down if it is not adjusted at work? the grinder is dismantled and repaired.

Will the coffee machine grinding knob break down if it is not adjusted at work? the grinder is dismantled and repaired.

One. when the coffee machine cannot be turned on, the reason may be that the power is not turned on, the coffee machine is on standby, or the power plug is not plugged in. The solutions are as follows: 1. Turn on the power switch .2. Reseat the power plug. 3. Press the coffee button to restart the machine.

Two. when the coffee is not hot, the reason is that the coffee cup is too cold. The solution is to warm the coffee cup.

Three. Hot water or steam cannot be exported because the output pipe is blocked. Solution: turn on the output tube with a needle.

Fourth, coffee CREMA is too little, because the coffee beans are not freshly roasted or improperly mixed. The solution changes the mix.

Five. the heating time of the machine is too long and the flow rate of hot water output is very small, the reason is that there is too much scale inside the coffee machine. The solution is given to the machine for scale removal.

Six. The coffee maker brewer cannot be removed because the brewer is not in the initial position or the dregs tank has not been removed. The solution: 1. Put all the accessories in place and open the machine, and the brewer will automatically return to its original position. two。 Take out the bean dregs tank before taking out the brewing machine.

Seven. the bean grinder works but does not export coffee for the following reasons: 1. The water tank is short of water, the brewer is blocked, the pipeline in the machine is not filled, the machine is automatically adjusting the amount of powder, hot water and steam knobs are not in the correct position. The solutions are as follows: 1. Add water and fill the inner line of the machine. two。 Clean the brewer. 3. Filling machine internal pipeline 4. Make some coffee. 5. Adjust the knob.

One. After making a cup of coffee, whether the flow rate of the coffee is too fast or too slow, the thickness of the coffee can be adjusted by the knob of the "S" coffee grinding thickness regulator. The knob is located in the coffee bean storage tank. When you rotate a digital amount clockwise, the flow rate of coffee will speed up a little bit, and when you rotate the knob counterclockwise by one scale, the flow rate of coffee will slow down. At the same time, the flow of coffee juice will also change.

Two. these adjustments must be made after two cups of coffee have been made, and must be adjusted according to the actual needs of the user.