Coffee review

How to adjust the thickness of the bean grinder?-Coffee bean grinder scale adjustment

Published: 2024-09-19 Author: World Gafei
Last Updated: 2024/09/19, How to adjust the thickness of the bean grinder-Coffee grinder scale adjustment remove the dial and screw off the nut shown above clockwise. Take off two gaskets (one with a handle) and turn the grinding core: turning clockwise is thickening and counterclockwise is fine. Be careful not to adjust too much. This is a rough tune. And install it. The nut is tightened counterclockwise. It has to be tight. General intention

How to adjust the thickness of the bean grinder?-Coffee bean grinder scale adjustment

Remove the dial and screw off the nut shown above clockwise. Take off two gaskets (one with a handle) and turn the grinding core: turning clockwise is thickening and counterclockwise is fine. Be careful not to adjust too much. This is a rough tune. And install it. The nut is tightened counterclockwise. It has to be tight. Usually make espresso with a scale between 8 and 12. Of course, you can adjust it to between 2 and 5. Then, when the scale is 25, you may grind the hand punch and the French pressing powder. If it's not thick enough, adjust it outside the scale. (this passage is transferred from the thickness adjustment of the ZD15 bean grinder of the half Moon Mountain people (a supplement to my playing coffee II).

These two methods can basically solve the problem of coffee powder thickness of Huijia ZD-15 bean grinder. Chen Lei himself has encountered these problems and has been entangled for a long time. Chen Lei sorted out the problem here this time, hoping to be helpful to his friends.

1. Applicable scenario

Hand flushing, siphon kettle, pressure kettle and similar brewing methods at home are recommended to use a hand grinder. It is not recommended to use espresso if it is made.

2 selection of grinding core

The movement of the hand bean grinder is divided into metal and ceramic. The metal will heat when grinding, making the aroma of coffee beans volatilize ahead of time; the ceramic is fragile, but the ceramic is basically not hot, so the aroma is corrected.

3 Brand introduction

Many people are using the sloshing A12 affordable, Kyocera, HARIO and TIAMO are also good, HARIO shanzhai Kyocera, TIAMO copycat HARIO. The grinding core of HARIO is manufactured by Kyocera, the brand of TIAMO is made in Taiwan, almost all of it is made in the mainland, and the plastic of TIAMO may not be safe. The grinding core of Kyocera CM45 can grind the powder needed by espresso, and I think it is better to grind espresso powder with special electric mill (not the best hand mill, such as HG-ONE).

0