Evaluation on the out-of-box use of Profitec PRO 700Italian Coffee Machine and Ditting KE640 Bean Mill

For professional baristas, please follow the coffee workshop (Wechat official account cafe_style)

The previous Italian coffee machine for home use was RANCILIO SILVIA with Yang's 901N bean grinder.

Let's talk about the conclusion first, upgrade the special feeling!

The original Silvia is a single boiler, coffee extraction and steam are heated by the same boiler.

If a single boiler is just an extraction, it's actually okay to turn a blind eye--

But if you want to extract and foam at the same time, you have to wait for the temperature to rise or drop to the temperature you want before moving on to the next step.

Forget it if it's just a drink for yourself at this time. But it's a nightmare when you have to cook more than one cup at a time, Orz.

After changing this great Profitec PRO 700coffee machine. It's not all 100 in the exam, it's super stable! Cooking more than one cup is super stable!

Double boiler + PID double control. 220V version is hot water boiler 1200W for 0.75L, heating speed is fast! The steam boiler is 1400W for 2L, which is quite large.

In the process of milking, the pressure is almost all up and down in 1Bar, and the recovery is fast-steady.

You can also choose water tank or external water pipe flooding, household shop business is suitable for both. Satisfied!

Don't say much-- let's start kicking the box at the door-- open the box first--

Click here to view external pictures

The box is very large-- and it's a little heavy-- I have the impression that the light-empty machine will cost 35kg.

Click here to view external pictures

Open the first floor.

With a double-hole handle, a single-hole handle, send a bottomless handle, simple Temper (looks like an European arc, with a flushing head is also an arc)

A water pipe can be directly connected to the water source. The small grid in the middle is an elevated shelf if your Espressor cup is too short.

By the way-- his single-hole handle and double-hole handle can choose to install a single filter cup or a double filter cup--

Of course, I choose a single-hole handle + a double filter cup-you don't have to split two holes just because you have to use two.

Click here to view external pictures

When the second frame is opened, it is PRO700 himself-- the anti-collision package is good--

Take a front photo right away-the Profitec PRO 700s are really good in texture and sparkling superreflective on all sides.

And the weight is very heavy, it is not thin sheet metal at all, and the sheet metal folding angle is also uniform, the angle is consistent and tidy.

Click here to view external pictures

Turn the left knob away from the left pole to spray steam, and turn the right knob away from the right pole to produce hot water.

The table on the left shows the vapor pressure, which usually falls at 1-1.5 Bar. The table on the right shows the hydraulic pressure at the time of extraction, usually 9 Bar.

Incidentally, the steam hole is a four-hole head--

Above the steam meter is the PID display that controls the double boilers. The temperature of the hot water boiler and the steam boiler can be adjusted and displayed through the button.

The video on Youtube tests that the hot water temperature of PID is quite accurate-the temperature of the effluent is similar to that shown on PID.

But I don't have the tools to measure it. It's XD.

The switch on the left of the PID is the main switch, the upper green light is the power-on display, and the lower orange light refers to the steam boiler heating.

Next, the most important thing is this E61 boiled head.

Hot! Hot hands!

Touching can be hot-- really-- if the material I read on the Internet is correct.

The E61 head will be heated with water from a hot water boiler, so that the whole head can be as hot as a hot water boiler.

What are the benefits!? The advantage is that even if you have a good accurate PID, the heat level of boiling is 92 degrees C. Good!!

But it turns out your coffee powder-filled handle is cold. Will the water still be accurate at 92 degrees C? That's not even close--

Therefore, E61 flushing head is very helpful to stabilize the water temperature of the extraction.

The black switch handle on the right side of the E61 cooking head stops down, and water is fed up. When entering the water, PID will start to read seconds to let you know the extraction time.

In addition, you can also choose to move to the middle half-open position, E61 cooking head will carry out pre-immersion action, which is one more way to improve the extraction rate.

Click here to view external pictures

This is the Profitec PRO700 water tray, the workmanship is also very heavy, there are reserved holes at the bottom to choose to install drainage pipes when the volume is large.

However, he also made a large water plate with 3L, which is enough to last for a long time.

Click here to view external pictures

After picking up the water tray, there are two hidden switches inside, and the left side is to choose the water tank or the external pipe to enter the water.

On the right is to choose whether or not to turn on or off steam boiler heating. Sometimes when you don't want to drink a latte, you can turn it off to save electricity.

Click here to view external pictures

The space above the preheating cup, in fact, because of the opening when the machine is turned on, the cup on top can be full of heat.

In addition, the stainless steel plate of this preheated cup can be picked up together with the handle, which will be the place to hold the water tank.

But I didn't take a picture of this place, leaving out XD.

Click here to view external pictures

Let's take a look at the PID section, which is when the computer is not turned on.

Click here to view external pictures

1.05 will be displayed first after power on. I guess this is the firmware version.

Click here to view external pictures

The next decimal point appears in front of ten digits, and the number displayed is the temperature of the hot water boiler, which is 56 degrees C.

Click here to view external pictures

Then the decimal point appears in front of the single digits, and the number displayed is the temperature of the steam boiler, which is 86 degrees C.

The factory-scheduled setting I got was to heat the hot water boiler to 92 degrees C first, and then heat the steam boiler to 123 degrees C.

When both boilers reach the temperature, they use PID to catch the temperature of each other.

Click here to view external pictures

The next morning when the machine arrived, he went to buy some coffee beans and got ready to start cooking and drink XD.

But FIKA FIKA coffee beans are not cheap either, XD.

Click here to view external pictures

A mouse tail when using a bottomless handle.

It may be that the rotary Pump is more stable than the original Silvia vibration Pump, and the tail is more likely to appear.

And the operation is quiet enough, and the texture is hard to improve.

After several weeks of experience, it is not only stable but also stable.

And the bubbling steam sounds a lot like a business machine, and the sound of the steam is clean and dry.

Turn it on and heat it up quickly. Hot water is added to the specified temperature of 92 degrees C for about 5 minutes, and steam to 123 degrees C for about 8 minutes.

It can be heated for the first time in about 13 minutes.

I am a XD who can fully accept to turn on the machine and touch it in the morning before making a cup of coffee.

In addition, if you want to heat both the hot water boiler and the steam boiler at the same time, you can enter the engineering mode to modify it.

Time at the initial temperature of the hot water / steam boiler 170.34 degrees C. This can be heated together to 92 degrees C / 123 degrees C in about 6:30 seconds.

But I don't think it's necessary. Because according to my experience, the coffee handle on the E61 is not even preheated yet.

On the whole, I am quite satisfied with the use of this Profitec PRO 700,

It's just that at the beginning, the process of finding a Taiwan agent was really unhappy.

It was said that the goods would arrive 14 days after the deposit was paid, and after 14 days without contact, I asked that it would be mailed only this week.

Ask what happened to say that Germany has a national holiday for one week, but I google can't find that national holiday for one week in Germany.

After 28 days, almost 40 days have not contacted and asked again, the boss can not say why, anyway, I just don't know that I haven't sent it yet, or I'm still sending it.

In fact, it is not that we cannot accept the postponement of time, but that we cannot accept that an agent does not care at all after collecting the deposit. Even if I asked, I hesitated and had no answer.

Finally arrived at the scene and waited for the plane to be delivered.

Forget it if you didn't call me back about the delivery time. After waiting for TNT to unpack the goods at the scene, the boss did not check that he wanted to deliver the goods directly.

If I didn't check it, I was really afraid that there would be a dispute after I went home to open the box.

The boss also politely said that he would come to your house tomorrow to have a look and teach how to use it. Of course, I can't wait for follow-up contact.

Forget it, it's really faster to study it yourself.

To tell you the truth, an agent is very unqualified in this way, which can only be regarded as a customs declaration bank at best. How can it be an agent?

If you give me another chance, I will certainly buy it directly from the Polish manufacturer who replied to my letter, except that it can save 20,000 yuan.

The attitude of Taiwan agents in doing things, I'd better God bless not to break down in the guarantee.

But all in all, it's a good machine.

-- the separation line between the coffee machine and the bean grinder

Add in the same show and unpack Ditting KE640 by the way.

It was Ditting KE640 who moved in with Profitec PRO 700s (actually arriving a lot earlier than XD).

Ditting and Mahlkonig seem to be the same brother factory.

Ditting's KE640 appearance and cutter head are also very close to Mahlkonig's K30, anyway, they all look like XD.

It was originally chosen by Anfim SP450 and Ditting KE640, but why did you choose this one? Ah Chuan, maybe it's because we hit it off, XD.

But I heard-- I heard that KE640 is quieter than Anfim-- and it seems to be more functional. Anyway, if you buy it, you just love it, XD.

Let's continue to open the box XD.

Ditting KE640 weighs about 15KG, plus the size of the bean nest is quite large.

KE640 powder is a quantitative type, press the button on the left is a single, the right is a double. You can set the number of seconds you need to stop.

Click here to view external pictures

This is the place where the coffee handle is put, and the screws next to it can be adjusted to match the height of the coffee handle.

But then I removed it directly-- because I could also use a cup to receive powder-- it was more convenient to flush out the old powder and so on.

Click here to view external pictures

Based on the fact that the bean nest was too big for the family.

So I went to Tuobao on the other side and found a stainless steel coffee mold maker.

As soon as the goods are received, the texture is good! Super heavy-- two-piece--

Click here to view external pictures

The upper and lower body looks like this.

Click here to view external pictures

Put a bean grinder instead of the original bean nest like this--

Take a frontal picture--

There's no problem with using it in the past few weeks-- it's just that if you use it for the average household, it's a little too much.

So before using it every day, it may be idling or washing off the powder the day before yesterday with some beans.

In addition, it is a bit more laborious to grasp the set number of seconds at the beginning of use.

In terms of the Profitec's double handle 14g, I set it to about 2.6s--

Of course, if you change the coffee beans or the situation changes, you will make it up manually--

After unpacking-- continue to drink coffee--