How to practice flower drawing and fusion? What's the difference between different fusion methods?

Divide the flower drawing into two stages to introduce and explain, and then refine each stage to each step and key points and matters needing attention to make it easier for everyone to understand. First of all, let's focus on "integration".

The height of the cup, the distance between the normal milk tank and the coffee cup is about 10cm (reference), which should be the distance between the cylinder mouth and the coffee liquid level. Each lesbian is different at this point, there is no exactly the same height and distance, there is no fixed height, but the purpose is only one thing, that is, to fully integrate milk foam and coffee.

Fusion lays the foundation for flower drawing, and the quality of integration determines the taste of this cup of coffee. The method of fusion varies from person to person, some people hold the cup hand does not move, hold the cylinder hand into the fusion, and some people make relative circle movement between the left and right hands, as if there is a half-circle difference between the two hands.

No matter how to merge, the surface of our milk coffee is clean, and the fused milk coffee has fluidity. In addition, the magnitude of the fusion has a lot to do with the thickness of the milk bubbles you hit, because the thicker the milk bubbles are, the worse the fluidity is, and the greater the degree of fusion is needed to ensure the fluidity of the surface of the milk coffee. However, the milk bubbles are too thick. The editor suggests that you can use the central point injection to increase the milk flow height and reduce the milk flow size to achieve greater penetration, otherwise you will bleach as soon as you start to inject it.

Milk flow size

The normal reference value is that the milk flow is a little thinner under constant conditions. The purpose of the milk flow size is to ensure that the milk foam and coffee are fully integrated without destroying the cleanliness and color of the grease. If the milk flow is too thick, it will have a greater impact and there is a certain probability that it will be thrown into the bottom of the cup to produce turbulence. Therefore, we will generally choose a finer milk flow for fusion, and if it is more flexible, the size of the milk flow should be carried out with the quality of the milk foam.

For example, if the milk foam is too thick, we need higher distance and finer milk flow, on the contrary, we can choose micro-coarse milk flow and closer milk flow to merge.

Fusion technique

These techniques do not have a great impact on the fluidity of flower drawing. Let's start with the differences between the three methods:

The word ● fusion method is the de-fusion of swinging left and right on a line, which greatly reduces the area of oil damage and achieves the purpose of fusion.

● circle fusion method is to turn the circle to fusion, this fusion method to a large extent to move on the oil surface, to achieve the purpose of fusion.

● fixed-point fusion rule is to carry out fusion at a point, this method hardly destroys the surface cleanliness of grease, and achieves the purpose of fusion.

The three fusion methods have their own advantages and disadvantages, and the best effect in terms of fusion state and uniformity is the circle fusion method (that is, large area de-fusion). The reason is very simple, the larger the fusion area, the easier it is to fully integrate milk foam and coffee. Fixed-point fusion and one-word fusion requires super grease and very good milk foam. Therefore, it is recommended to circle a large area to merge.