Why do you pour milk? Why do you pour milk?

In some places, thermometers are used to measure. I think this kind of teaching method is not good. Technology is something that people need to understand attentively, and it is not very good for people to improve their own skills with the help of external forces.

The fourth step is to know a dead angle of contact between a foam-drawing jar and the steam tube of a coffee machine. After watching a lot of domestic and foreign baristas beating milk foam, coupled with their own constant attempts, I found that playing milk foam has a dead angle, just like playing video games, some dead corners can not hit you, but you can hit others. This angle is very troublesome to say in words, probably because the nozzle of the flower jar must be lifted, and the cylinder block should be tilted according to the rotation direction of the foam.

Step five, find the vortex. The function of this vortex is to pull the coarse foam below the liquid surface through the vortex to make the surface clean. There are many states of a vortex, each of which needs to be observed and remembered. This point is so deep, let me keep it simple. If you want to have a vortex, the sprinkler of the steam pipe should not be too deep under the milk noodles.

The sixth step is the problem of moving the flower cylinder down and up. The sprinkler is in good contact with the milk, that is, open the steam valve, and the vat moves down very slowly, and you will hear the steam of "eating"cut" with the milk (about the shear force, when we discuss the principle of milk foaming later, talk slowly! The sound made by it is commonly known as "the sound of breathing". The sound of air intake to human body temperature can no longer appear, otherwise, there will be a lot of coarse foam on the surface.

At this point, move the flower jar up a little bit (just a little bit, which is important, which is understood by many people as moving up continuously, which is very wrong), and let the steam sprinkler leave the cutting surface so that the sound of "eating" can not be heard. At this point, by adjusting the angle of the vat, remember that it is the angle, not the position of the sprinkler and the surface (very small angle adjustment), find the vortex, pull the coarse foam off the surface in the foaming stage, and continue until the temperature reaches the hot temperature.

The seventh step is to understand the state of milk after steam and how to deal with milk bubbles. After the milk is dismissed, it is not the ideal foam, but in a layered state. The lower layer is the heated milk, and the upper layer is the "foam" after the milk is dismissed, so we have to deal with the milk after discarding.

Quite famous 7 wobble up and down to remove the rough foam from the surface. Shake and let the hot milk mix well with the top foam to form foam. This step is very critical, some friends do not attach great importance to this point, then all previous efforts will be wasted.

Before the eighth step, the milk foam has been in a state of shaking in the flower jar to avoid the layering caused by this. This is a professional habit that must be developed.