Fresh Coffee Beans Coffee Roasting Curves with Coffee Flavors Boutique Coffee Beans
1. The air in this seam has a different thermal conductivity from the beans outside. If it will cause the two temperatures to be different. Most of the problem is that the air inside is much hotter than beans. For example, the oven is too hot, or the beans are not thoroughly dry. You will see that the middle is more scorched than the two sides. Generally speaking, after a scorch, the explosion will be faster, or not dense. At this time, it is very likely that some of the beans will taste astringent before they are baked. In addition, the overburnt part will taste dull. Like bitter soda cracker.
two。 The same bean may have different moisture content. This is about processing. This is more common in washed beans. Black spots will appear when the dryness is uneven. The result is also scorched and astringent taste. Wronged this bean. Everyone loves African beans. It always bakes well. This is also related to dryness in Africa. At least the beans are uniform, although the altitude is high, the beans are thick, 1 burst is always dense. Have you noticed that high-altitude beans from South America are not so easy to bake? Because the climate in South America is wetter. And it is not as expensive as African water, so there is often water to wash beans.
3. High altitude also makes the small inequality more obvious. Beans are thicker at high altitude and generally taste more complex because beans ripen more slowly. There are more subtle flavors (more obvious). But small defects, such as uneven moisture and uneven physique caused by lack of nutrition, will also be more obvious. Therefore, this will also cause the above uneven baking, baking can not produce the essential taste of beans.
4. The focus on the surface is usually due to the burning of the beans. For example, the barrel baking machine touches the metal bucket. To create the focus. Some baked beans will also be too close to the heat source, resulting in the phenomenon of scorching the surface.
- Prev
Introduction to the knowledge of roasting coffee beans join the roaster
Pay attention to the sound changes-coffee beans make two bursts during baking, and the first burst is low, indicating that the starch begins to turn into caramel and the water evaporates with carbon dioxide. The second burst sound is more violent and sharp, this is the sound of coffee bean cell fiber fracture, at this time should immediately stop heating, and as soon as possible with cold air to lower the temperature of the bean. The first explosion and the second explosion
- Next
The importance of cultivating beans after roasting Coffee Powder Fine Coffee beans
Each coffee bean contains about 200000 individual cells, each of which operates like a tiny pressure vessel, like a small reaction device. In the early stage of roasting, the moisture in the raw beans dissipates quickly, and the living water in the coffee begins to evaporate. With the increase of the temperature of coffee beans, the evaporation of water will put pressure on the cell wall. In this process, water plays a leading role, and the oil in coffee.
Related
- Beginners will see the "Coffee pull flower" guide!
- What is the difference between ice blog purified milk and ordinary milk coffee?
- Why is the Philippines the largest producer of crops in Liberia?
- For coffee extraction, should the fine powder be retained?
- How does extracted espresso fill pressed powder? How much strength does it take to press the powder?
- How to make jasmine cold extract coffee? Is the jasmine + latte good?
- Will this little toy really make the coffee taste better? How does Lily Drip affect coffee extraction?
- Will the action of slapping the filter cup also affect coffee extraction?
- What's the difference between powder-to-water ratio and powder-to-liquid ratio?
- What is the Ethiopian local species? What does it have to do with Heirloom native species?