Introduction to the video of foaming skills and production methods of Italian coffee machine
The skill of making milk foam with Italian coffee machine
1. Do not put the steam pipe into the milk, because there may be some condensed water vapor in the steam pipe, so you need to put it for a while before preparing to foam to drain the excess water from the pipe.
2. Beginners can insert the thermometer into the container, then insert the steam pipe obliquely into the milk, and then turn on the steam switch.
3. Slowly adjust the position of the steam nozzle to a little bit from the surface of the milk, but never above the liquid level, or the milk will be spilled everywhere. When the position is correct, a steady "hiss" sound will be heard, and the milk level will begin to rotate. If the steam pipe is scaled in the wrong position, it will be very loud or almost silent, and the milk surface may be bubbling continuously.
4. After the milk foam has been continuously dense, bury the steam pipe a little deeper and let the steam continue to heat the milk. The steam pipe had better be buried at an angle just enough to make the milk rotate.
5. When the temperature reaches 60 ~ 65 degrees, when the hands feel slightly hot, you can turn off the steam switch.
6. Wipe the milk attached to the steam pipe with a wet dishcloth, and at the same time release the steam to spray the remaining milk out with the steam, so as not to block the steam pipe after the milk dries.
At this point, the teachers of Wang Sen Coffee training School shared so much at first that it would lead to indigestion. Friends can also try in accordance with the above methods, oh, play a few more times, will certainly be able to play a satisfactory milk foam.
- Prev
How to understand the relationship between coffee roasting curve and taste
In Europe at the beginning of April. Seven bakers bake Costa Rica with the same machine and the same baking degree. Tarasu. In terms of techniques, they are all different, at least in details, so who is right? Everyone has to go back to the cupping desk for answers. Some people adjust the fire three times after an explosion to change the curve, while others are slightly dull and adjust only once until the end. About coffee baking
- Next
Coffee flavor curve record which kind of coffee roaster is better than the flavor wheel
The coffee flavor curve is introduced in detail. Beans will lower the temperature in the stove when they go down. This is the ditch at the beginning. two。 From then on, it began to heat up. But at first, the temperature should not be too high, nor should it be too low. It can't cool down. The beans should be dried first. After drying, it will be heated evenly to make the beans crisp. Although some high-tech roasters allow you to try baking with two peaks high and low.
Related
- Beginners will see the "Coffee pull flower" guide!
- What is the difference between ice blog purified milk and ordinary milk coffee?
- Why is the Philippines the largest producer of crops in Liberia?
- For coffee extraction, should the fine powder be retained?
- How does extracted espresso fill pressed powder? How much strength does it take to press the powder?
- How to make jasmine cold extract coffee? Is the jasmine + latte good?
- Will this little toy really make the coffee taste better? How does Lily Drip affect coffee extraction?
- Will the action of slapping the filter cup also affect coffee extraction?
- What's the difference between powder-to-water ratio and powder-to-liquid ratio?
- What is the Ethiopian local species? What does it have to do with Heirloom native species?