Coffee review

Effect of Coffee Bean treatment on Flavor introduction of Grinding scale varieties in Manor production area

Published: 2024-09-20 Author: World Gafei
Last Updated: 2024/09/20, Effect of Coffee Bean treatment on Flavor introduction of Grinding scale varieties in Manor area 1. Try to buy fresh coffee, usually one-way valve packaging, please pay attention to the production date on the packaging, of course, the closer to the purchase date, the better. It is recommended to buy half a pound of packaging, even if you need a pound of beans. Because it can prolong the shelf life of coffee properly without opening the package. two。 Open coffee beans, please.

Effect of Coffee Bean treatment on Flavor introduction of Grinding scale varieties in Manor production area

1. Try to buy fresh coffee, usually one-way valve packaging, please pay attention to the production date on the packaging, of course, the closer to the purchase date, the better. It is recommended to buy half a pound of packaging, even if you need a pound of beans. Because it can prolong the shelf life of coffee properly without opening the package.

two。 Open coffee beans should be kept away from light in a sealed bottle, choose a sealed bottle with good sealing, and keep it in a place that avoids direct light source as far as possible. If your sealed bottle is transparent, dark paper can be used outside the sealed bottle.

3. Please don't keep the coffee beans in the refrigerator. This is not the right way. Too low temperature will lock up the aroma of coffee.

4. Please finish the unsealed coffee within two weeks, which is why it is recommended that you buy half a pound of coffee.

5. If there are conditions, it is best to have a bean grinder to grind the beans before brewing coffee. If you ask the coffee shop to grind the beans for you at the time of purchase, the fresh-keeping time of the coffee powder will be shortened and you should drink it as soon as possible. Because the coffee is ground to increase the contact area between the coffee and the air, the aroma and flavor will evaporate more quickly.

1. Choose beans:

Put the harvested fruit in the water tank, and the ripe fruit will sink, while the unripe and overripe fruit will float up and can be removed.

2, dry:

Put the selected ripe fruit in the square and expose it for 5-6 days until it is fully dry. At this time, the fruit becomes dark brown and the moisture content is 13%.

3, shelling:

After drying, the peel becomes fragile and easy to fall off, and can be removed by machine. Farms run by enterprises usually have their own shelling factories, while small farms are processed by processing centers.

4, selection and grading:

Exquisite farms identify defective beans manually or by machine, pick them out and throw them away. Manual selection usually uses a transmission belt about 1 meter wide, with several female workers sitting on both sides visually picking out bad beans, and some good farms are even selected several times until defective beans are not seen. Machine selection rules use computers to identify defective beans, followed by a grading process that divides coffee beans into several quality grades according to established standards. Good coffee enters the selected coffee market, while bad coffee flows into the commercial coffee market.

5, polish:

The exocarp and endocarp can only be removed by shelling treatment. At this time, the silver film is still wrapped in the outer layer of the seed, and the film has to be ground off by machine. Then, pack the coffee beans into a bag of 60KG. The weight of bags varies slightly from region to region. Most of them use sacks.

0