Semi-automatic coffee machine what kind of powder hammer is good-Delong semi-automatic coffee machine brand price introduction

Semi-automatic coffee machine what kind of powder hammer is good-Delong semi-automatic coffee machine brand price introduction

In the Italian coffee machine, the temperature value is mainly affected by the size of the boiler or heating block, as well as good heat conduction materials, there is an obvious difference between the toy machine and the professional Italian coffee machine. In general, many standard toy machines are equipped with small boilers (below 200ml) or small heating blocks, so it is difficult to achieve a stable temperature, and the temperature fluctuates greatly in the process of coffee extraction. The machines of many small household appliance brands are like this (such as Cankun, Delong, Electrolux, etc.). After all, these brands are not professional coffee makers. Another thing to consider is a good heat conduction material, a good machine has a better circuit and pipeline design, using copper or stainless steel as the main material of the coffee machine, they have good thermal conductivity (to ensure uniform and stable temperature). Otherwise, it is still more than 90 degrees from the boiler to 70 or 80 degrees from the coffee machine, which will be more obvious in the low temperature environment.

In addition, everyone's application strength will be different, and there is a great difference between boys and girls, so it is necessary to adjust the corresponding strength according to the actual extraction effect. It should be noted that pressing powder is only one of the links, and there are a variety of factors that affect the extraction, such as powder quantity, powder thickness, cloth powder, pressing powder, which need to be taken into account.

1. Flat: the most common powder press with a flat bottom at the bottom.

2. Euro Curve: the bottom of the powder hammer is arc-shaped, and the highest height difference at the edge of the powder hammer is 3.355MM.

3. C-Flat: it belongs to the combination of Euro Curve and Flat. It does not have a curved bottom like Euro, but a pink hammer like Euro has a height difference. The bottom is a horizontal flat bottom, but the edges are curved and there is a height difference.

4. Ripple: it is difficult to control, the bottom of the powder hammer is wavy.

5. C-Ripple: improved on the basis of Ripple, the pink hammer is made into a flat bottom at the edge, there are several raised concentric circles in the center, and the pressed powder center is wavy and the edge is horizontal.

6. AmericanCurve: relative to the bottom Radian of Euro Curve, the height difference between the highest point of the arc and the edge of the powder hammer is reduced to 1.661MM.