Coffee review

Melaleuca coffee machine cleaning trouble manual cleaning video

Published: 2024-09-17 Author: World Gafei
Last Updated: 2024/09/17, Melaleuca coffee machine descaling trouble manual cleaning video one. Press the double cup button and the on/off button simultaneously for more than two seconds. The descaling icon flashes and the drip tray icon lights up. II. Empty the drip tray and reinsert it. The water tank icon lights up. III. Open the lid of the water tank and pull it upward until it is removed from the machine. IV. Pour the detergent into a container containing 0.5 liters

Melaleuca coffee machine descaling failure manual cleaning video

one。 Press the double cup button and the switch button for more than two seconds at the same time. At this point, the descaling icon flashes and the water tray icon lights up.

two。 Empty the water tray, then reinsert it, and the water tank icon lights up.

three。 Open the lid of the tank and pull the tank up until it is removed from the machine.

four。 Pour the detergent powder into a bowl filled with 0.5 liter of warm water, then stir the detergent powder. When the descaling powder is completely dissolved, pour the descaling solution into the water tank, and then re-insert the water tank.

five。 Press the coffee concentration button, start the integrated descaling program, run on the integrated descaling program card, the water flows through the coffee machine and flows into the water tray at multiple intervals, this process takes about 15 minutes, and then the water tray icon lights up.

six。 Empty the water tray, then reinsert it, and the water tank icon lights up.

seven。 Flush the water tank and fill it with tap water to the maximum scale.

eight。 Press the coffee concentration button and continue to run the integrated descaling program, where water flows out of the coffee outlet and flows through the coffee machine to the water tray, a process that takes about 5 minutes, and then the water tray icon lights up.

nine。 Empty the water tray and reinsert it. After a short heat, the standby icon lights up, the machine is ready to run, and then insert the Merlot Claris water filter back into the water tank.

One. First open the lid of the tank, and pull the tank up until it is removed from the machine, fill the tank with water until the maximum scale is reached, and then reinsert it.

Two. Press the single cup button and the switch button for more than two seconds at the same time.

Three. during the whole cleaning process, the cleaning icon flashes while the water tray icon flashes.

Four. empty the water tray and the coffee grounds container, and then reinsert the water tray without the coffee grounds container, and place the coffee grounds container under the coffee outlet. The first two automatic flushing cycles run, and then the standby icon lights up.

Five. reach into the recess on the right side of the machine, then pull out the cover plate to the right, and then the red button on the cooker handle rotates the handle clockwise to stop

Six. use the handle to pull the cooker out of the machine, and after the cooker is removed, the standby icon and the cleaning icon flash alternately

0