Instructions for the use of Merlot Coffee detergent introduction to cleaning video maintenance

Instructions for the use of Merlot Coffee detergent introduction to cleaning video maintenance

one。 Press the double cup button and the switch button for more than two seconds at the same time. At this point, the descaling icon flashes and the water tray icon lights up.

two。 Empty the water tray, then reinsert it, and the water tank icon lights up.

three。 Open the lid of the tank and pull the tank up until it is removed from the machine.

four。 Pour the detergent powder into a bowl filled with 0.5 liter of warm water, then stir the detergent powder. When the descaling powder is completely dissolved, pour the descaling solution into the water tank, and then re-insert the water tank.

five。 Press the coffee concentration button, start the integrated descaling program, run on the integrated descaling program card, the water flows through the coffee machine and flows into the water tray at multiple intervals, this process takes about 15 minutes, and then the water tray icon lights up.

six。 Empty the water tray, then reinsert it, and the water tank icon lights up.

seven。 Flush the water tank and fill it with tap water to the maximum scale.

eight。 Press the coffee concentration button and continue to run the integrated descaling program, where water flows out of the coffee outlet and flows through the coffee machine to the water tray, a process that takes about 5 minutes, and then the water tray icon lights up.

nine。 Empty the water tray and reinsert it. After a short heat, the standby icon lights up, the machine is ready to run, and then insert the Merlot Claris water filter back into the water tank.