The Italian coffee machine is powered off and can't be turned on. Which brand is good to use?

The Italian coffee machine is powered off and can't be turned on. Which brand is good to use?

1. Turn the power switch of the coffee maker to the heating gear every morning to heat the coffee machine. Make sure the power indicator is on and hang the two filter handles on the coffee faucet of the machine.

2. Pour the coffee beans into the bean bowl of the bean grinder and pour out only the amount of beans needed for that day. Repackage the remaining coffee beans and store them in a dry room temperature.

About 15 minutes later, the pressure gauge on the coffee machine reaches the set position, indicating that the machine has been heated and ready for use.

4. in order to ensure that a high-quality coffee drink can be made, turn on the coffee switch before making coffee and release about 5 ounces of water from each of the two faucets, and some steam and hot water from the steam pipe and hot water pipe on both sides. heat the coffee machine fully for another ten minutes.

5. Turn on the power of the bean grinder to grind the coffee beans, do not grind too much powder in advance, so as to avoid the loss of coffee powder aroma.

6. Hold the filter handle in the left hand and turn to the left to remove the handle and insert the handle under the bean grinder. Pull the powder dispenser with your right hand.

7. Tap the edge of the filter with one end of the small end of the hand-held powder press to smooth the powder, and then press the powder down vertically at the end of the big head. Then tap the edge of the filter with one end of the small head and press the powder firmly with the big end for the second time.

8. Wipe off the residual powder on the edge of the filter by hand, turn on the coffee switch and release hot water for 3 seconds, then hang the hand on the machine faucet and turn right and lock it.

9. Take the coffee cup from the warm cup board on the upper part of the machine and put it under the outlet of the faucet. Press the corresponding coffee button on the lower board.

ten

10. After the coffee is done, turn the hand to knock the coffee grounds into the dregs bucket, wipe the filter net with a brush or a clean cloth, and gently buckle the handle to the faucet to preheat and keep warm.

The phenomenon of stopping heating occurs when it is difficult to get water on the machine. Because I don't know the model you use. Do not know whether the machine is automatic water or water tank, water tank, then how to detect the water level, may be caused by the long-term use of pure water problems. But these factors may affect judgment because of different machine principles.

Milk foam production

1. Heat the milk to 50 or 60 degrees and set aside.

2. Open the steam button and use an empty cup to catch the mixture of water and steam discharged at the initial stage.

3. After a continuous large amount of steam is discharged, the steam rod is in semi-contact with the milk level.

4. the milk foam forms slowly, and the cup is removed as soon as you get the right one.

5. Add the foam to the coffee with a large coffee spoon and OK it.