Delong coffee machine grinding degree change grinder adjust disassembly and repair blockage

Delong coffee machine grinding degree change grinder adjust disassembly and repair blockage

Coffee flows out of only one coffee outlet.

The coffee flow is blocked at the exit. We can use toothpicks to clean the coffee outlet.

The milk foam is too big.

Milk is not cold enough or not semi-skim milk. We need to use refrigerated skim or semi-skim milk (about 5 ℃). If the effect is still not ideal, we need to change the milk brand.

Can't make milk foam.

The milk foam generator is dirty. We need to clean the milk foam generator according to the instructions.

When in use, the steam stops releasing

The machine will stop releasing steam in three minutes. After waiting for a few minutes, start the steam function again.

The machine cannot be started.

1. The machine is not powered on. We need to power on the coffee machine first.

two。 The main power switch of the machine is not turned on. We need to set the main power switch of the machine to the "1" position.

One. After making a cup of coffee, whether the flow rate of the coffee is too fast or too slow, the thickness of the coffee can be adjusted by the knob of the "S" coffee grinding thickness regulator. The knob is located in the coffee bean storage tank. When you rotate a digital amount clockwise, the flow rate of coffee will speed up a little bit, and when you rotate the knob counterclockwise by one scale, the flow rate of coffee will slow down. At the same time, the flow of coffee juice will also change.

Two. these adjustments must be made after two cups of coffee have been made, and must be adjusted according to the actual needs of the user.