Coffee review

How to make coffee by pressing the pot and making coffee by hand?

Published: 2024-11-08 Author: World Gafei
Last Updated: 2024/11/08, The characteristics and differences between law pressure pot and hand brewing coffee are that the core difference between law pressure and drip filtration and hand brewing is that drip filtration and hand brewing continuously inject hot water from above, so it will cause continuous pressure on coffee. This continuous pressure will produce more extraction on the surface of coffee powder, which means that we cannot extract it for a long time.

The characteristics and differences between French pressing pot and hand brewing coffee

The core difference between pressure and drip filtration and hand flushing is that drip filtration and hand flushing continuously inject hot water from the top, thus exerting continuous "pressure" on coffee. This constant pressure will produce more extraction on the "surface" of coffee powder, which means that we can not extract it for a long time, because the coffee powder on the surface will quickly become less delicious because of "over-extraction". And pressure, because of its low-and-slow, that is, the slow-paced soaking method, is a milder, step-by-step extraction process. In other words, French pressure is a less fastidious way of making (compared to other methods), which can bring more full-bodied (full-flavored) coffee with more acidity and fruity aroma.

Therefore, the author of this article recommends that you boldly try a 6-8-minute immersion time (compared to the 3-4 minutes commonly thought to be). In addition, the manual of the Bodum pressure pot I bought (which should be recognized as a better brand of if not best) clearly recommends that the soaking time is 4 minutes.

The proposed process and points for attention are as follows:

Coffee powder must be coarse enough. I am used to asking the seller to grind the whole beans, because unless you are willing to buy a more expensive bean grinder, it is generally impossible to adapt to all kinds of coffee machines without gear (I also have drip filtration and Italian style, which is the finest in Italian style and the thickest in French pressure).

The ratio of water to coffee powder is 1:16-1:14. The Bodum manual suggests 4 oz, that is, 118 ml coffee, corresponding to the spoon it gives. I compared the next Starbucks tall (12oz) to almost 1max 3 cup (i.e. coffee powder with a slightly smaller volume of 80 ml water).

For normal pressure, the water can be boiled and injected directly, and for deep-roasted and Decaf coffee beans, the water temperature will be lower by 10-15 °F (5.5-8.25C).

Pour in hot water at once and stir fully for 30-45 seconds.

Wait 6-8 minutes (if the coffee powder is ground rough enough, if it is fine, 3-4 minutes).

Because of the legal pressing characteristics mentioned, we should also follow the principle of "do not let the water produce any pressure on the coffee powder" when pressing, and press down as gently as possible.

0