How to pull the milk foam made by the manual milking machine? how to beat the milk foam to make it dense and delicate?

Professional coffee knowledge exchange more coffee bean information please follow the coffee workshop (Wechat official account cafe_style)

1. Can the milk from the manual milking machine be used to pull flowers?

The answer is yes. Let's first look at the simple deconstruction of espresso. Espresso has two basic features, namely, the upper layer is a layer of coffee-like foam, and the bottom is black coffee liquid. This kind of coffee can be used to make lace coffee. So all we have to do is to fill the coffee cup with black coffee about 30ml, then use the beaten milk foam, pour in a little bit, and then stir it well with a spoon, and the white milk foam on the surface becomes a "coffee-colored foam", and it floats on top of the black coffee. Next, we can use milk foam to pull flowers, I have tried N times, ah, the effect? Good. However, the coffee made with this kind of liquid is too light, and the flowers with strong layers have limitations, so we can only try it and do not promote it. Of course, it's good to practice your hands in this way from time to time.

two。 Why does the milk foam do not blend?

As soon as the milk foam is poured into the concentrate, it is immediately mixed with the coffee, and it is impossible to float on it like the milk foam in the master pull flower video. I don't have enough foam and don't mix enough with milk, and I sometimes do the same.

3. How can I mix the milk well?

That is, milk and milk foam, how to mix it well, when pulling flowers, it is not all white as soon as it is poured down? Temperature. Temperature is important. When you foam, put your empty hand on the flower cup to feel the temperature of the milk. When you feel very hot and can no longer be placed on the flower jar, it will make the foam too hard. The hard foam looks stiff, and it doesn't mix with the coffee when you pour it into the coffee, but accumulates on top of your coffee like fluffy beaten cream. If you play a little longer, it will be layered, 90% of which is flowing milk, and a thick hard foam lid floating on it. When you pour it into the coffee, the milk will flow out of the flower cup first. So if you want to mix milk and foam well, temperature is the key. Do not put the foam for too long after beating, or it will be layered.

4. How to make more and meticulous milk foam?

As for how to make a good milk bubble, here is a stupid milk bubble method, that is, pour half the milk into the steel cup, let the steam pipe and the milk perpendicular to the center or the edge of the steel cup, then let the steam head just touch the surface of the milk, then turn on the steam to 1x2, do not move the steel cup, slowly close when the milk reaches 50 degrees, close at 60 degrees, and the final temperature will reach 66 degrees. In this way, you can make a good cup of foam.

5. What kind of Italian machine do you want to use for milking?

Generally speaking, there are steam heads with three, four and five holes in the machine, and as long as they are a little familiar with them, they all make good milk bubbles. However, the amount of steam produced by the machine, the degree of dryness and wetness of the steam, and the size of the stomata still have an impact on milking.

6. Why do you use water to practice milk foaming?

First, as we all know, water is transparent, which allows you to see more clearly how the vortex is formed.

The second is to better master the number of holes in the play of different milk bubbles! Third, beginners should remember to use a thermometer when you fail to beat the milk foam into a thin shape. If the temperature cannot be better controlled, then the coffee you make is unstable. You may make milk foam once or twice in ten times, but that is not a stable quality.

7. The difference between steam milking and manual milking

First of all, the hand-beaten foam cannot be compared with the steam of the machine at all. The fineness of the steam makes its milk foam very delicate and slippery, and the radiation surface of the steam is wide, so the milk foam will be more uniform and mix better. The hand is mainly squeezed through the small hole of the filter screen, and the milk foam is thicker.

8. How to use the electric milking machine bought at home to make milk foam?

I use my own local method to make milk foam, and it feels good. The appliance is the electric milk beater, 9.9RMB, which is bought by Yijia. Step: add fresh milk to the glass, heat it in the microwave oven for 45 seconds, stir in the milking machine for 1 minute, and the milk foam will become. I use a French press to filter out the 50ml coffee and pour it directly from the top of the foam. I can see that the coffee is gradually mixed with the milk and the white foam rises slowly.

9. How to make milk foam?

Method 1: use a milk bubble pot to make handmade milk foam

1. Pour the milk into the milk bubble pot, the amount should not exceed 1 stroke 2 of the milk bubble pot, otherwise the milk will overflow due to expansion when making the milk bubble.

two。 Heat the milk to about 60 degrees, but not more than 70 degrees, otherwise the protein structure in the milk will be destroyed. Be careful! The lid and strainer cannot be heated directly. (for example, make ice foam to cool the milk below 5 degrees Celsius, of course, do not overfreeze and let the milk freeze.)

3. Put the lid and the filter on, and quickly twitch the filter to press the air into the milk. when you twitch, you don't need to press to the end, because you want to pump the air into the milk, so you can act on the surface of the milk; you don't need too many times. gently twitch about 30 times.

4. Remove the lid and strainer and scrape off the thick foam with a spoon, leaving dense hot (ice) foam.

Method 2: use steam foam to make milk foam.

Do not put the steam pipe into the milk, because there may be some condensed water in the steam pipe, so let off some steam in the front section and drain the excess water by the way.

Insert the thermometer into the container, then insert the steam pipe obliquely into the milk and turn on the steam switch.

Slowly adjust the position of the steam nozzle to a little bit from the surface of the milk, but not above the liquid level, or the milk will be spilled everywhere. A steady "hiss" will be heard when it is in the right position, otherwise it will be very loud or almost silent.

When there is enough foam, you can bury the steam pipe a little deeper and let the steam continue to heat the milk. The angle of the steam pipe had better be just enough to make the milk rotate.

The steam switch can be turned off when the diffuse reaches between 60 and 70 degrees.

Wipe the milk attached to the steam pipe with a wet dishcloth and release another steam so that it will not be difficult to clean after it is dry.