Coffee review

The correct gesture of Coffee pattern Coffee pattern

Published: 2024-11-08 Author: World Gafei
Last Updated: 2024/11/08, Professional coffee knowledge exchange more coffee bean information please follow the coffee workshop (Wechat official account cafe_style)

Professional coffee knowledge exchange more coffee bean information please follow the coffee workshop (Wechat official account cafe_style)

When you master the milk foam, you should learn the basics of coffee flower drawing: heart shape, because many patterns are re-developed from the heart shape. The coffee flower first tilts the coffee cup and mixes the milk in the coffee with a circle movement. when the coffee is close to the edge of the cup, shake the milk pot, pull the milk pot up, and the milk column is lifted and pushed forward to form a heart-shaped pattern. Yes, the original heart-shaped pattern is inverted, as long as you turn the cup, the positive heart-shaped will appear.

The steps of milking:

Flush before pressing the steam switch:

Objective: to rinse the steam pipe to remove the moisture at the front end and avoid the need for milk foam to get too wet.

Tip: cover it with a cup or a clean rag to avoid spraying

Insert ice milk into the steam pipe:

Objective: to rinse steam into milk

Tips:

Pipe depth:

If the diameter of the pipe is inserted too low, it will only heat up and will not change the foam.

On the contrary, if the pipe diameter is inserted too high, it will produce big bubbles, coffee flowers are not beautiful, you can knock flat on the table, so that the big bubbles become small bubbles.

Now the steam pipe has an anti-dull line, just let the place below the line soak in the milk--

Rush into the seat:

The most perfect and foolproof steam injection point is when the steam pipe is inserted into the steel cup.

You can lean against the small mouth of the steel cup and point to the center and then slightly offset the 1cm

​ press the steam switch:

​ purpose: to start milking.

Tip: when steam is injected, the ear should listen attentively--

There should be the sound of drinking drinks blowing on the straw, and there should be no crisp feeling of bubbles hitting the metal steel cup.

​, clean the steam pipe.

But in fact, because of the first injection stage, we were in a hurry to start rocking to the left and right before we reached 3 cups.

Causing the love to sink again at last--

0