How can the roasting degree of Blue Mountain Coffee be suitable for the Baking Curve of Lanshan No.1 Coffee Bean

Professional coffee knowledge exchange more coffee bean information please follow the coffee workshop (Wechat official account cafe_style)

Baking curve of Jamaican Blue Mountain Coffee in Front Street

Bean temperature: 170 degrees

Roasting is the source of coffee flavor, roasting raw beans is called roasting, raw beans can not be drunk without baking, roasted coffee beans have determined 80% of the taste of coffee, the roasting process is very tricky, the fire is too strong, the fire is too weak, then the inner ripe overcooked. Coffee beans are roasted internally and externally, and the key point is to control the heat.

[firepower]

The firepower directly affects the roasting degree of coffee beans. The flavor of the coffee beans and the time we want to bake. The more firepower, the more flavor, but at the same time. All flavors are not necessarily good flavors. With enough firepower, coffee beans can release more flavor substances. But it also highlights the bad flavor of coffee beans.

[temperature recovery point]

Beans into the boiler, will immediately absorb heat, the boiler temperature will suddenly drop, and then reach a certain point in time, the temperature rises, this equilibrium point is the return point.

[turning yellow point]

Raw beans enter the endothermic stage, in order to transfer heat to the inside of the beans, use the conductivity of water, if the water content of beans is low, the time to reach the yellowing point will be shorter, on the contrary, if the beans have more water content, the time to reach the yellowing point will be longer. Water evaporation is converted to steam, and the internal vapor pressure and temperature of the beans rise, when the beans begin to expand, destroying chlorophyll and entering the yellowing point.

We also sampled some beans from the baking process to see how this has changed.

So throughout the baking process, we should cooperate with the use of the throttle, adjust the flavor of coffee beans to the best state, and ensure the cleanliness of coffee beans at the same time.

Through proper caramelization, coffee will have a higher complexity and level, thicker taste, bringing caramel, chocolate, barbecue and other flavors to the coffee. Pyrolysis can break down the substances that bring plant flavor to coffee.

[burst point]

An explosion refers to the obvious and strong sound of coffee beans in the machine during coffee roasting, a bit like the sound of making popcorn or burning firewood. When the coffee bean absorbs heat and the pressure caused by the evaporation of water in the bean is greater than the strength of the coffee bean itself, the cell wall of the coffee bean will burst because it cannot withstand the pressure of the heart expansion, and the coffee bean will make a burst sound and release heat and sound energy.

This is the emergence of "one explosion". Release different flavor compounds (that is, aromas of flowers, fruit, etc.) and browning (that's why coffee beans are brown). At this time, it is also a time when the development of coffee beans has changed greatly, it may only come out one second earlier or one second later, and its flavor can also be very different.

[temperature rise]

The temperature difference between the two time points, as shown in the figure, there will be a temperature difference between the second minute and the third minute. Subtract the latter (122.4 °C) from the former (108.8 °C) to get a value (108.8 °C).

Take baking [Jamaica Blue Mountain] as an example, it is necessary to understand the nature of this bean. Blue Mountain is a NO.1 bean with more than 17 mesh, with a defect rate of less than 3%, a moisture content of about 13%, and a medium bean density, which is suitable for baking with steady improvement.

In the process of designing the baking curve, personal experience, in the baking process, it should be noted that the blue mountain baking curve is suitable for low bean temperature, the bean density is small, the temperature rise is not too high after an explosion, the temperature rise below 6 degrees will be better, lengthen the development time.

First of all, the furnace temperature is 170 degrees Celsius, the fire power is 140 degrees after the throttle is set for 1 minute, the throttle is unchanged, the temperature is 153 degrees, the bean surface turns yellow, the smell of grass completely disappears, the dehydration is completed, the firepower is adjusted to 115 degrees, and the throttle is changed to 4.

In the 8th & # 39th minute, ugly wrinkles and black markings appear on the bean surface, and the smell of toast obviously changes to the smell of coffee, which can be defined as a prelude to explosion. at this time, listen clearly to the sound of an explosion point, and start to explode at 8 degrees 39 ". Adjust the firepower to 90 degrees, the throttle is fully open (adjust the firepower to be very careful, not to be so small as to be free of bursting sound), and put the pot at 201.3 degrees.

END