The composition skills of pulling flowers, the tips of perfect matching beans, Italian-style coffee.

The lines are clear

At the beginning of entering the leaf graphics, the most difficult thing is how to show the lines clearly, often the reason why the lines can not be easily mastered at first lies in the flow control. Stable flow control is the most important key to flower control, and it takes time to practice to be able to maintain the consistency of flow while swinging.

In addition, the handling of the steel cup will affect whether the flow can be flexibly controlled. It is recommended to use the fingers and joints of the hand to grasp the balance point of the steel cup handle, and then gently buckle the other fingers but do not push. Do not force the wrist, pay attention to the flexibility of the wrist, so that you can easily control the flow when swinging.

Distinct colors

In order to look good, you usually want the brown and white foam parts to be clearly presented, so the graphics must be able to show a strong contrast of colors. When the foam is injected, the surface layer slowly increases resistance to block the foam. As the resistance increases to the stage where the foam can be completely blocked, the surface pattern will gradually change from the original brown color to a light brown color, and finally become a clearer white. If we want to show the ambiguous light brown, we have to use the height of the steel cup to skip the ambiguous stage.

At first, we will pull the distance between the steel cup and the surface of the coffee to about 10cm, as long as the height is not so high that the milk will damage the surface of the Crema.

As the injected foam slowly begins to delaminate, press the steel cup close to the surface of the coffee in one breath, skipping the blurring stage and showing a clear white pattern.

Note: first practice the use of direct injection method to create clearly colored graphics, through the most basic graphics so that you can fully grasp the timing and color of milk foam layering.

Graphic integrity

In the composition of the flower, you will want to show the shape in the cup as big as possible, so that the figure can be clearly and completely presented in the cup. You can inject the foam by tilting the cup, and when the foam begins to layer, the sooner the white pattern appears, the better. The trick is to tilt the cup so that the front end of the steel cup is closer to the surface of the coffee, so that the forming time of the pattern can be greatly increased, and the size of the white figure can be definitely increased by using this technique. Pay attention to the cooperation of both hands and slowly straighten the tilted cup.