How to make coffee, milk, coffee, flower, coffee, coffee.
1. Do not put the steam pipe into the milk, because there may be some condensed water in the steam pipe, so let off some steam in the front section and drain the excess water by the way.
two。 Insert the thermometer into the milk container, then insert the steam pipe obliquely into the milk and turn on the steam switch.
3. Slowly adjust the position of the steam nozzle to a little bit from the surface of the milk, but never above the liquid level, or the milk will be spilled everywhere. A steady "hiss" will be heard when it is in the right position, otherwise it will be very loud or almost silent.
When the foam is sufficient, you can bury the steam pipe a little deeper and let the steam continue to heat the milk. The steam pipe had better be buried at an angle just enough to make the milk flow.
4. The steam switch can be turned off when the temperature reaches between 60 ℃ and 70 ℃.
5. Wipe the milk attached to the steam pipe with a wet dishcloth and release a little steam at the same time to avoid the difficulty of cleaning the milk after it is dry. 1. Pour the milk into the milk bubble pot, do not exceed the capacity of the milk bubble pot 1x2, otherwise the milk will overflow due to expansion when making milk foam.
two。 Heat the milk to about 60 ℃, no more than 70 ℃, or the protein structure in the milk will be destroyed. Be careful! The lid and strainer cannot be heated directly. (for example, cool the milk to less than 5 ℃ when making ice foam. Of course, don't overfreeze the milk and let it freeze. )
3. Cover the lid and the filter, quickly twitch the filter, press the air into the milk, do not need to press to the end, because it is to pump the air into the milk, so as long as the action on the surface of the milk; the number of times is not too much, gently twitch about 30 times.
4. Remove the lid and strainer and scrape off the thick foam with a spoon, leaving dense hot (ice) foam.
Method 2: use Italian coffee machine steam to control milk foam
- Prev
Coffee bean treatment method introduction what is coffee treatment method
After removing the pulp, the quality of coffee honey treatment was better than that of drying treatment, but not as good as washing treatment. This method of processing coffee beans by honey treatment has recently been sought after by coffee lovers. It has a sweet taste and is rich in Crema. It is suitable for extracting Espresso from the base of Italian coffee. The advantage is that it can restore the flavor of coffee beans, the coffee is more sweet, and the taste of red wine is stronger.
- Next
How long does it take to make coffee jacquard milk foam? how long does it take to learn Italian pull coffee machine to pull flowers?
Official start: first of all, add the milk foam to the Espresso coffee, and when the milk foam and coffee have been fully mixed, the surface will be thick. That's when it's over. Due to the large size of the foam, you need a larger cup, preferably a Cappuccino cup or a mug. Now the formal flower drawing begins, starting with the first leaf.
Related
- What is the meaning of lactic acid fermentation with coffee bean treatment?
- How to judge the state of foam by sound?
- How does the latte pull out the unicorn pattern? Come to get for a little trick to improve the flower pull!
- Will flower pulling affect the taste of the latte?
- Do you know the history of coffee?
- The difference between honey treatment and sun washing what is raisin honey treatment?
- What kind of milk can a novice use to make coffee foam to keep the foam longer? The correct method and skills of milking tutorial sharing
- Why do washed coffee beans taste sour? Flavor characteristics of washed Coffee
- Introduction to the skill of how to practice the size and height of water injection around the circle of hand-brewed coffee
- How do beginners practice coffee flower drawing from scratch?