Coffee review

How to investigate the manual coffee grinder and introduce the correct use of grinding scale

Published: 2025-08-21 Author: World Gafei
Last Updated: 2025/08/21, Manual coffee grinder how to investigate the correct use of the grinding scale different bean grinders have different adjustment dials, so you should check the model of the coffee grinder and read the instructions carefully to determine the direction and strength of the dial

How to investigate the manual coffee grinder and introduce the correct use of grinding scale

Different bean grinders have different adjustment dials, so you should check the model of the coffee grinder and read the instructions carefully to determine the direction and strength of the dial. In general, if you keep in the habit of checking the settings of the bean grinder, you only need to make very small adjustments. As long as you move the turntable within 3 mm, you can change the thickness of the powder. Although 3 mm is a very small number, the grinding time of the same coffee beans will change by 3-5 seconds.

Specific operation steps

Determine the direction of adjustment you need (finer or thicker). Make sure there are enough coffee beans in the warehouse, and the valve between the warehouse and the sharpening knife is opened so that the coffee beans can fall smoothly into the grinding area.

Turn on the grinder for 10 seconds and discard the coffee powder (these are coffee powders that have not been adjusted).

Use the coffee powder to make a cup of coffee to ensure the accuracy of the steps of serving, flattening and pressing powder. Test the quality of the coffee and the extraction time. Constantly adjust the dial to make the powder reach a perfect thickness.

The hand grinder gives everyone the impression that it is very tiring to grind. At present, coffee beans are more popular in the domestic market for medium and deep roasting.

The son is still easy to grind. You can try sitting on a stool, clamping the bean grinder on your knee, and then grinding it. I usually use this square.

Law, it is very easy to say, and there is no need to press down hard. After each use, try to clean the residual powder in the grinding core, bean warehouse, powder cartridge and powder cartridge. When it is not clean, you can wash the dishes.

Chi blew with her eyes closed. If you don't use it for a long time or for a long time, you can clean it with warm water again, if the grinding core is

Metal can not wash hands with different structures, divided into fixed shaft and non-fixed shaft, the product is very different. It's not fixed and uneven, but in a single product,

Different levels can be found.

A good fixed shaft hand mill can do Italian grinding, such as HG-ONE,PHAROS,ROSCO, while HARIO 1B is fixed.

If the shaft fails, the product is uneven

0