The importance of steaming hand-made coffee what's the difference between steaming and presoaking?

Professional barista communication, please pay attention to coffee workshop (Weixin Official Accounts cafe_style)

Steaming and pre-soaking are sufficient, directly affecting the taste of a cup of coffee.

Steaming and pre-soaking

Steaming: refers to the production of hand-brewed coffee when the hot water light, soft, fast, evenly placed on the coffee powder, so that the coffee powder "activation", so that coffee releases a lot of carbon dioxide, coffee powder will form a process of upward bulge.

Pre-soaking: refers to the process of making esp by which the water of the brewing head quickly moistens the surface of the coffee cake within 1-2 seconds.

I.

Steaming: Most people pay a lot of attention to the softness of the water flow and the freshness of the coffee powder when making hand-brewed coffee. Steaming is also indispensable. Good steaming can fully infiltrate the coffee powder, activate the coffee activity, and form a good gap between the coffee particles, thus making the subsequent coffee extraction process smoother. The so-called activation is to make the coffee powder have a volcano-like swelling state, the coffee powder rises upward, the air between the coffee particles will be heated and expanded, the coffee particles themselves will release a large amount of carbon dioxide, and bubbles will be formed between the particles. These gaps will make the coffee powder form a uniform filter layer and supply the space required for hot water to penetrate. Good coffee steams form approximately uniform voids, and the downward flow of coffee liquid is uniform. If a good filter layer cannot be formed, then stagnant water will be formed, the drip rate will slow down, the extraction time will be prolonged, and then the phenomenon of excessive extraction will be formed. Coffee taste will also be messy, sour mainly, coffee itself characteristics are difficult to reflect, taste thin, with a sense of stimulation, return fragrance is not dignified enough.

So what are the factors that affect steaming?

The first is the choice of equipment. A good filter cup and filter paper are not only necessary for making good coffee, but also necessary for good steaming. High-quality brand filter cup design groove can make the air flow is good, will not let the gas from the coffee surface gushing out, high-quality filter paper permeability will also make hot water quickly through, will not form a drip filter speed fast and slow.

Second, there must be a suitable hand flushing pot, which can control the water speed and flow rate, flow rate, and the hardness of the water flow.

Third, water. Steaming water does not need to be too much, just need to wet the coffee surface, but it needs to be soft and light, fast and even, just like spring rain moistening things, so that steaming speed at the same time.

Fourth, water temperature. I personally think that the best temperature for making hand-brewed coffee is 83 degrees Celsius, and the highest temperature should not exceed 90 degrees Celsius. This water temperature will not produce too much bitterness when steaming, nor will it have too much sourness, and it can also make the coffee fully expand.

Fifth, the time from start to finish. Personally, I think that steaming really doesn't need so long in theory. Observation is the most important thing. From the beginning of swelling uplift, the best time for the first water injection I personally think should be before it expands to the maximum, but just before it stops expanding. If the expansion is to the maximum, stop expanding and then inject water, the gap formed will be too large, and it will be collapsed by sudden water flow, and it will not be fully extracted.

II. prepreg

Pre-impregnation is a problem that occurs in esp production.

Pre-soaking takes place within 1-2 seconds after pressing the extraction button. This process is very short, so short that it seems to be negligible, but what happens in this 1-2 seconds affects the quality of the subsequent extraction state, that is, the taste of coffee.

What is the purpose of pre-soaking? In fact, pre-soaking and steaming are roughly the same, that is, the coffee surface is wetted, so that the coffee cake expands rapidly, so that the cake forms a good filter layer, theoretically, the expansion space of coffee powder is about 1-2mm, and the expansion makes coffee powder particles form uniform bubbles. Pre-impregnation provides the function of expanding these coffee particles to form uniform spaces, allowing the aroma of coffee to be released freely.

So what are the influencing factors of prepreg? The first factor affecting pre-impregnation is the filling amount of coffee powder. Of course, the filling amount here refers to the filling amount after pressing powder. The perfect filling amount is below the filling line of the handle, and then take it off after the handle card is brewed. If there is no trace on the powder cake, it is qualified. Then what is excellent? In theory, the perfect filling amount is that the surface of the powder cake and the water outlet net of the brewing head have a gap of about 1-2 mm. This space happens to be reserved for coffee powder, which is used for physical expansion. Second, pump pressure. Stable pumping pressure is a necessary condition for making good coffee and, of course, for pre-impregnation. Third, water temperature. The temperature of the water during the pre-soak stage is preferably between 95 and 93 degrees Celsius, so that the coffee will not be excessively bitter.