Fancy Lafayette vat introduction: SAERDNA COFFEE PITCHER pointed nipple tub

[Saerdna Pitcher]

[Saerdna Pitcher] it took Saerdna 6 months to design and complete.

From the original material selection, drawing design, capacity determination

To the design and fine-tuning of cylinder nozzles and handles that we are concerned about, and then to the exquisite craftsmanship

Every detail is permeated with Saerdna's paranoid exquisite and Excelsior

This is the birth of this artwork-like Saerdna Pitcher.

What exactly are the characteristics of Saerdna Pitcher (hereinafter referred to as SP)?

Packaging.

Under the paranoia of Saerdna, this box can be called a work of art.

Hardened single-layer corrugated paper is molded at one time, and the eye-catching Logo is surrounded on three sides.

And mark the capacity. There is a Saerdna alien header at the top.

There is an environmental recycling logo on the back.

Saerdna said that this is his most satisfied design.

Handwriting at the socket: Design By Saerdna

It marks his designer: Saerdna.

Appearance.

When you open the package, a delicate Pitcher pops into your hand.

Mirror polishing process, handle pull wire aluminum treatment, pure stainless steel locking bolt.

Laser relief Logo with sunken bottom to avoid wear

There is not too much installation on the side, only the Logo body SAERDNA COFFEE overall visual simplicity and atmosphere, but also retain the luster and texture of the steel itself.

Materials.

3mur1: [cylinder block material]

The Saerdna Pitcher cylinder block has been tested repeatedly.

Finally, 304steel with 1mm thickness was selected as the original material.

(there will be a Teflon version later)

The initial choices are as follows:

0.7mm 304stainless steel

1.0mm 316stainless steel

1.3mm 304stainless steel

1.0mm pure titanium / α titanium alloy

1.0mm copper-nickel alloy (white copper)

In the end, because 0.7mm 304stainless steel is thinner,

The stamping process is easy to deform and the feel is too light.

And 1.3mm will bring too heavy feel, and affect the heat conduction.

316 steel and α titanium alloy are not selected because of their high price.

Pure titanium is a good choice, light, hard and with good thermal conductivity.

However, because the processing technology is too complex, it is not adopted.

In fact, the glossiness and texture of white copper are amazing.

However, it is easy to wear and tear, affect the appearance, and finally abandon.

But the editor secretly revealed that Saerdna himself retained a few α titanium alloy originals for his own use, and even the editor felt that Brother Bao was too bad.

3mur2: [handle material]

After testing and weighing one by one, [aviation aluminum] was finally selected.

The relative density is only 2.7, which will not affect the feel of the hand due to the overweight of the solid.

And has good corrosion resistance and strength.

Also secretly revealed that the handle will also have a variety of options in the future.

(316 steel, white copper, polyamide (nylon)

There's even... Pure titanium handle, and... Well, don't say too much)

Industrial Design

4Mutual 1: [capacity]

600ml/21oz (there will be a 310ml/11oz version later)

4Mutual 2: [handle]

In the end, the seamless welding of the handle was not chosen, which is similar to the brand Gear.

Because it's more beautiful, but a little less intense.

Finally, a stronger spot welding was adopted and the three-point welding was made with a little modification.

Bring higher strength with a stable triangular structure.

I believe we all have the experience of breaking the handle.

On the other hand, the open-end handle frees your end fingers better.

The baristas with big hands have good news.

The concave arc at the top is an ergonomic design.

No matter how you squeeze / hold the nipple (especially the horizontal grip)

You will think, this is really too! Shu! Take it! Yes!

4Mutual 3: [cylinder head]

This is a focus of 70% of the attention of flower lovers.

But Saerdna says no milk tank is 100% suitable for any picture.

But right now,

First, we can make up for it through skills and habits.

Second, we can make the milk tank better and more suitable for GM.

In order to be more inclined to flower lovers, SP uses a sharp-mouthed design.

And the following: compared with the nozzles of other pointed nipples on the market

4Mui 3Mui 1: [SP VS Rw]

Rw is a more popular milk jar.

In contrast, SP is sharper and easier to do trickle.

And has done the thin processing in the cylinder mouth, the diversion is more smooth.

4Mui 3Mui 2: [SP VS Gear]

Gear is a pointed-beaked flower jar with a high share in the recent flower-pulling competition.

The design is unique and comfortable to hold the handle.

A cylinder nozzle with a large angle and a small opening and slightly turned down.

And all kinds of good looks brought by various surface treatments, which are very popular with baristas.

But nine out of ten crooked handles upset baristas very much.

SP compared to Gear

The opening angle is longer, and it is easier to approach the liquid surface forming.

With the elimination of lip flipping, there is a more tendency for liquid to flow forward, and it is easier to shape "ultra-thin milk".

Comprehensive evaluation.

5-1: appearance

The SP is a work of art with exquisite craftsmanship.

On the other hand, the practical design is more inclined to pull the flower jar of the player.

Independently designed models are different from all the moulds on the market.

Stainless steel mirror treatment, easy to clean, high food safety

Only the original version is available for the time being. Teflon, electroplating, and paint versions will be launched one after another, and there will be special material versions.

5-2: design

The shape does not adopt the belly design similar to Motta, so it is easier to milk (the diameter of the cylinder is too small and the foam is easy to be stratified).

Nor does it adopt the flip design of Tiamo to make it easier to dump liquid (the cylinder port is too wide, it is not easy to control flow when making complex graphics)

The open round handle attached to the ergonomic design is easier to hold and feel more comfortable, while the independent sharp mouth design makes flow control / molding more comfortable.

5-3: suitable for people

If you are a fan of flower drawing, you can't miss it.

And if you are a simple Barista, then the exquisite workmanship of this Pitcher must also make you love it.

The first batch of SP has now arrived in stock!

The baking lacquer star blue handle version is available now.

Come and buy it quickly, my friend Ben.

Details of black gold style