The effect of Coffee floret on the taste of Milk Coffee the degree of fusion of milk foam and the amount of Italian blending

one。 Preparation of milk:

Milk temperature: beat to 55-60 degrees or so, after the sweetness of lactose is shown, stand by.

Winter: the temperature can be a little higher.

two。 Fusion degree of milk foam:

In the process of milking, the degree of whirlpool or tumbling determines the degree of fusion. After milking, the higher the upper and lower uniformity of the milk in the tank, the better the fusion of the milk. The milk foam with good fusion degree is mixed with coffee, and the taste of milk coffee is more uniform and uniform. How to judge the fusion degree of our milk foam? In the process of flower drawing, such as wheat spike, whether the last piece of wheat spike is obvious or not, whether it can be plotted to test the degree of foam fusion, and through several graphics to check the foam, so as to improve the milking method and get better foam. Of course, when the temperature is very high, the decrease of the fusion degree of milk foam is also very amazing. Therefore, when we test this item, it is better to lower the milk temperature by 55 degrees.

three。 Foaming amount of milk foam:

According to the shape of the cup, wide or narrow mouth, and depth, to determine the amount of foaming. Why not depend on the type of milk coffee (latte or Cabo). For example, if you also use an ultra-wide caliber bowl and an ultra-small caliber cup to make a cup of Cabo, the amount of foaming milk you need must be larger than the latter, so you can test it. So the point is, in the flower pull, even if your foaming amount is fixed, we can adjust the thickness of the milk bubbles on the outermost surface of the cup body through the fusion height, and adjust the uniformity of the foam and coffee below the surface.

four。 Other milk cafes are related to fusion:

There are many methods of fusion, so let's study the effect of the amount of thick and fine injected in the flower drawing process on the final milk coffee. High fusion, piercing the grease surface, thickening or thinning the fused water column will affect the surface grease. If the fixed-point center is injected into the fusion, the final surface grease layer will be retained more intact, if a large number of fusion, accompanied by a large number of milk columns, you will mix more oil into the liquid. In this way, you can use different fusion techniques to make milk curry with different flavor and taste. In addition, the application point of the fusion water column will have different effects on the surface and inside. If you sell it, you can test it yourself.

Some cases:

When the foam foaming amount is not high, high fusion, encounter medium-baked tilapia beans (thick fat) beans, no matter how you pull flowers or not, the final difference in the flavor of milk coffee will not be more than 10%. Because the grease has strong fluidity, strong diffusivity, and the grease is not thick, you will find that it is easy to blend cleanly and evenly, and finally the coffee is made with a mouthful of "wordy" to go up gently. If you encounter some deep-baked beans, want to make the taste mild, then we can take: turn the circle as much as possible, bring some of the oil into or rush into the bottom, so that the last milk coffee performance is less intense, the overall taste is more uniform. The remaining 20% of the remaining 30% of the drawing space in the cup, you can float any pattern you want.

Summary:

Control fusion, control foam state, choose a good cup shape, make a good proportion, and make a cup of milk coffee that you like.