How to beat foam with Steam-the principle of foam with Steam
How to beat foam with Steam-the principle of foam with Steam
After the machine reaches the correct temperature, turn on the steam switch, release the water that always exists in the steam pipe, and then turn off the steam switch.
Put the nozzle under the surface of the milk and turn on the steam. If you turn on the steam when the nozzle is above the liquid level, you will get larger bubbles, and it will take a lot of effort to get rid of these bubbles.
Slowly take the nozzle to the surface of the milk. Stop (stop just as it breaks the surface) just as the nozzle is about to come off the surface. Now that the air is sucked into the milk, you will hear a typical hiss. If you accidentally take the nozzle out of the water, the pressurized air will blow on top of the milk instead of into the milk, resulting in large bubbles.
At this stage, there is no doubt that you have formed small and medium-sized bubbles on the surface of the milk. Now we will try to get rid of them. There will be a whirlpool where the air blows into the milk. All the bubbles on the surface will be pulled into this whirlpool and disappear. It is still important to put the nozzle in the right place to avoid new bubbles.
Now you have a texture made of tiny bubbles. Put your empty hand on the flower cup to feel the temperature of the milk. When the foam rises, you lower the steam pipe carefully so that it touches the milk. If you are satisfied with the amount of foam and the milk is not warm enough, you can lower the nozzle into the milk. Now the milk is beginning to swirl. By doing so, the milk can be evenly heated by steam. When your hands feel a little hot, keep the nozzle below the liquid level and turn off the steam.
Whirlpool and pouring will still have bubbles in your foam most of the time. A good way to get rid of these bubbles is to tap the flower cup on the workbench. Don't knock too many times so as not to cause too much foam. A good way to judge whether the milk is thick enough is to rotate the flower cup so that the milk begins to form a whirlpool. You have to make more cappuccinos to learn what milk should look like. But here are some suggestions:
- Prev
Electric foam machine how to beat milk-milk foam is dense
Coffee pulling steps/methods Select coffee powder. In fact, coffee beans are also OK, you have to grind them yourself. There's a variety of coffee flavors, vanilla, and there's a 5-degree range of flavors, from MILD to DARK. With filter paper, there are bamboo made, there are ordinary. Spread the filter paper into a funnel shape and put a few spoonfuls of coffee powder into the filter paper according to personal taste (how much coffee is generally put
- Next
Introduction to the graphic video tutorial of coffee drawing and frothing skills
Introduction to the video tutorial of coffee drawing and milking skills (1) place the steam pipe at the center of the steel cup, 45 degrees to the upper right, near the edge of the cup, with a depth of about 1 centimeter. (2) turn on the steam pipe, move the steel cup down slowly, and roll the milk up and down and slowly let the volume expand. (3) when the foam expands to eight minutes full, pull the steam pipe oblique.
Related
- What is the meaning of lactic acid fermentation with coffee bean treatment?
- How to judge the state of foam by sound?
- How does the latte pull out the unicorn pattern? Come to get for a little trick to improve the flower pull!
- Will flower pulling affect the taste of the latte?
- Do you know the history of coffee?
- The difference between honey treatment and sun washing what is raisin honey treatment?
- What kind of milk can a novice use to make coffee foam to keep the foam longer? The correct method and skills of milking tutorial sharing
- Why do washed coffee beans taste sour? Flavor characteristics of washed Coffee
- Introduction to the skill of how to practice the size and height of water injection around the circle of hand-brewed coffee
- How do beginners practice coffee flower drawing from scratch?