Coffee roaster structure usage brand ranking
Coffee roaster structure usage brand ranking
1. Tubular burner
The principle of coffee roaster is introduced by DISCOVERY.
The gas burner used in our FUJIROYAL1 roaster.
Bend the iron pipe to drill 72 2.3 "holes with an electric hammer.
This process is a very practical process.
It is usually the job of a new member in our club.
2. Bunsen burner
The principle of coffee roaster is introduced by DISCOVERY.
Our FUJIROYAL3 "5" 10 "and some large roasters are used.
A gas burner with a distinctive name, a burner with a burner invented by Mr. Bunsen in Germany.
The burner used in our company has about the gas consumption of 1000KCAL.
Both the semi-hot air type and the direct-fire type are used, but the direct-fire roaster must be cleaned regularly because coffee shavings fall on the stove mouth.
3. Air gun burner
The principle of coffee roaster is introduced by DISCOVERY.
In our large roaster lineup, the burners used in roasters over 30 years old are used in completely hot air roasters.
The back end of the roaster is equipped with a hot air generator to generate hot air to bake coffee beans.
4. Charcoal fire
The principle of coffee roaster is introduced by DISCOVERY.
Soft coffee is baked with the soft heat held by charcoal (the temperature of Vivas is low) and the far infrared and infrared rays produced by charcoal fire.
Because coffee will have the fragrance of charcoal fire,
Will bake unique coffee.
5. Infrared
The principle of coffee roaster is introduced by DISCOVERY.
Infrared generating device installed on the side of the inner pot
Bake coffee from the heat source of the gas burner below and the radiation heat source from the side.
A roaster with very little demand.
The heat source corresponding to high-quality coffee,
I hope to get everyone's attention in the future.
Characteristics of inner pot
FUJIROYAL coffee roaster currently has 4 kinds of inner pots!
The taste of coffee does not matter, and the use of coffee roasters is also different.
- Prev
The reason for the non-expansion of hand-brewed coffee powder how to form a "hamburger" by steaming
The reason why hand-brewed coffee powder does not expand-can coffee powder be brewed directly? step 1: folding filter paper. Select the V60 filter paper for two people, fold the filter paper into a cone along the edge of the seam of the filter paper, and put it into the V60 cup. Step 2: wet the filter paper. Remove the smell of filter paper. Step 3: grind beans and pour powder. Pour the ground powder into the silk-moistened filter paper, gently pat the filter cup, smooth the powder, and dig in the middle of the powder.
- Next
What should you pay attention to when making espresso?-what coffee beans are used in espresso?
What should you pay attention to when making espresso? what coffee beans should be used in espresso? in the process of pressing powder, after evenly covering the coffee powder, there is usually an action of leveling it with mild force. after this action is the action of real pressure, at the end of mild pressure, some people will have a bump handle to let the powder attached to the powder bowl fall off.
Related
- Beginners will see the "Coffee pull flower" guide!
- What is the difference between ice blog purified milk and ordinary milk coffee?
- Why is the Philippines the largest producer of crops in Liberia?
- For coffee extraction, should the fine powder be retained?
- How does extracted espresso fill pressed powder? How much strength does it take to press the powder?
- How to make jasmine cold extract coffee? Is the jasmine + latte good?
- Will this little toy really make the coffee taste better? How does Lily Drip affect coffee extraction?
- Will the action of slapping the filter cup also affect coffee extraction?
- What's the difference between powder-to-water ratio and powder-to-liquid ratio?
- What is the Ethiopian local species? What does it have to do with Heirloom native species?