How to clean the hand-ground coffee grinder

Follow the caf é (Wechat official account vdailycom) and found that Beautiful Cafe opened a small shop of its own.

The correct cleaning method

First, clean it easily.

1. After making coffee, clean up the residual coffee powder in the powder box

2. Keep the environment of the coffee mill area dry

3. Wipe the fuselage easily and keep it clean.

2. Daily cleaning

1. Turn off the power.

2. Clean the powder mouth with a brush.

3. Remove the remaining coffee powder in the powder accumulator, pull the powder handle, and remove the remaining coffee powder in the powder accumulator (the ground coffee powder should not be used overnight).

4. Clean the inner wall of the powder accumulator with a brush.

5. Clean the coffee mill body and wipe it with a dry towel. Be careful not to use alcohol and other chemical reagents to wipe the appearance of the machine and spray text.

6. Empty the remaining coffee in the coffee bucket and insert the plug board at the bottom of the coffee bucket. Remove the coffee bucket. If there are any coffee beans left in the coffee bucket, transfer the coffee beans to a sealed jar for storage to keep the coffee beans fresh.

Third, weekly cleaning

1. Clean the grinding wheel

Prepare the special resin powder for coffee mill cleaning, add the powder to the coffee bucket, turn on the power switch and grind, finish grinding and turn off the power supply.

Dial the powder handle to remove the coffee powder mixed with powder in the powder accumulator. Open the powder accumulator cover, remove the coffee bucket, and use a vacuum cleaner to remove the powder from the grinding wheel, powder outlet and powder accumulator.

Reinstall the coffee bucket, add the coffee beans, turn on the plug-in board and power, and grind the coffee beans.

Operate repeatedly until there is no residual powder in the ground coffee powder.

Turn off the power and discard the coffee powder. Clean the grinding wheel, powder outlet and powder accumulator.

2. Check the interval between the pulverizer handle and the powder accumulator

Remove the powder accumulator cover, gently dial the powder handle, and observe whether the powder handle rotates normally and whether it is flexible.

3. Clean the coffee bucket

Clean the oil stains on the coffee bucket wall with a neutral cleaner. Be careful not to use cleaning agents that are corrosive and add flavor ingredients. After cleaning, dry with a dry towel and install.

Fourth, quarterly maintenance

Professional engineers and baristas perform the following:

Clean the coffee blade and check the blade wear.

Turn off the power and remove the coffee bucket.

Scoop out the remaining coffee beans from the coffee mill with a spoon.

Unscrew the fixed grinding disc, loosen the grinding wheel clockwise, and remove the grinding wheel.

Clean the coffee powder of the upper and lower grinding wheel with a brush and vacuum cleaner, and observe the wear of the grinding wheel blade. If the blade is seriously worn, please replace the grinding wheel.

After cleaning, reinstall the grinding wheel and coffee bucket, cover the powder accumulator cover, and adjust the thickness of coffee grinding to meet the requirements.

Hand grinder-maintenance method of hand grinder cleaning of bean grinder

This is for a coffee maker with a bean grinder, such as a combination of saeco Hike Coffee machines. Must pay attention to the bean grinder can not add water, do not use wet coffee beans, otherwise it will block the bean grinder, and even cause damage to the bean grinder. If you don't usually drink much coffee, don't put too many coffee beans in the bean trough. Use as many coffee beans as you want to keep them fresh. This bean grinder must not grind anything else (many users will grind mung beans and peanuts.) Never, or it will cause damage. In the coffee powder outlet to keep unobstructed, do not residual coffee powder, otherwise it will block the bean grinder. If the jam is blocked, you can follow the instructions and consult the distributor. if you are not familiar with the coffee machine, it is best not to grope for the damage caused by it.

Hand-grinded coffee machine-boiler descaling of maintenance methods for hand-ground coffee machine

This is similar to the drip filter coffee machine, if you use the water quality is too poor, this maintenance must be done, and the interval is not too long, once every six months is the best. Descaling methods can be read the instructions or consult the dealer.