Coffee review

The practice of latte introduces whether the octagonal mocha pot can be heated directly on the gas stove

Published: 2024-09-20 Author: World Gafei
Last Updated: 2024/09/20, Practice Editing practice: use utensils and materials. The right amount of deep-roasted coffee beans (about 7 grams of coffee powder in a mug standard) Italian coffee machine syrup. Soak the cup (warm cup) in hot water to raise the temperature and then pour out the excess water for use. A simpler method is to place the coffee cup in the heat storage area of the Italian coffee machine and extract the cup during concentration.

Practice editor

Practice: use utensils and materials.

The right amount of deep-roasted coffee beans (about 7 grams of coffee powder per cup if made by mug standard)

Italian special coffee machine

syrup

1. Soak the cup in hot water (warm cup)

Make the temperature rise and then pour out the excess water for use. A simpler way is to place the coffee cup in the heat storage area of the Italian coffee machine, where the temperature of the cup is enough for extraction and concentration.

two。 Grind the deep-roasted coffee beans, pour the coffee powder into the filler and flatten the coffee with a powder press, then buckle the filler to the espresso machine extraction port to extract ESPRESSO. When extracting, pay attention to keep the extraction mouth close to the wall of the mark cup as far as possible, so that the grease of ESPRESSO can be formed more completely. According to the actual situation of filling pressure, the extraction time is generally 20-25 seconds. The amount of extraction is 30ml.

3. If you are making an original latte, you can add chocolate syrup to the extracted ESPRESSO. According to your personal taste, it is generally 6 to 8 milliliters more moderate. If you make other lattes, such as vanilla lattes, add vanilla syrup and pay attention to it as before.

4. Take the right amount of milk and put it under the steam nozzle of the espresso machine to make a high-temperature mixture of milk and foam. Try to control the temperature, more than 90 degrees may cause the milk to boil, so that all the bubbles will be destroyed.

5. Shake the mixture of milk and foam up and down so that the foam is concentrated on the top as much as possible, so that it is easier to control the proportion. Scrape off the thicker foam with a spoon, and the thicker foam will destroy the taste and affect the shape of the final finished coffee.

6. Shake the right proportion of milk and foam mixture so that the foam and milk are fully integrated.

7. Finally, the homogenized milk and foam are poured into the ESPRESSO to control the flow to pull flowers, thus completing a cup of Italian latte.

0