Coffee review

How to play coffee foam manually-- an introduction to beginners

Published: 2024-11-08 Author: World Gafei
Last Updated: 2024/11/08, How to beat coffee foam manually-A beginner's introduction to the steam pipe steam outlet mode, mainly divided into: external expansion type and centralized type two. Different forms of steam pipe, the steam intensity and steam output will be different, coupled with the change of the position of the outlet hole and the number of holes, it will cause the difference between the angle and the way when milking. And the expanded steam pipe is dispelling the milk.

How to play coffee foam manually-- an introduction to beginners

The steam outlet mode of steam pipe is mainly divided into two types: external expansion type and centralized type. Different forms of steam pipe, the steam intensity and steam output will be different, coupled with the change of the position of the outlet hole and the number of holes, it will cause the difference between the angle and the way when milking. When dispelling milk, the expanded steam pipe should not be too close to the edge of the steel cup, so that it will not easily cause turbulence. And centralized steam pipe, in the angle of control should be more attention, otherwise it is easy not to play a good milk foam tissue steel cup size is related to the type of coffee drinks to brew, the larger the cup volume, the larger the steel cup, generally speaking, when brewing cappuccino using 600CC capacity steel cup, brewing iron coffee is using 1000CC capacity steel cup, using the correct steel cup capacity to make a good organization of milk bubble. Because it is the way to make coffee flowers, so the shape of the steel cup is mainly a sharp mouth, while different sharp mouth shape steel cup, need to rely on their own more to practice. The basic principle of milk foaming is to use steam to hit the milk, so that the liquid milk into the air, using the surface tension of milk protein to form many small foams, so that the liquid milk volume expansion, into a foam-like milk bubble. In the process of foaming, lactose dissolves in milk because of rising temperature, and uses foaming to seal lactose in milk, while the function of milk fat is to make these small foams form a stable state, so that when these milk bubbles are drunk, the fine foam will burst in the mouth, so that the taste and aromatic substances have a better magnifying effect, so that the milk produces a sweet and thick taste and taste. And in the fusion with coffee, the adhesion between molecules will be relatively strong, so that the full combination of coffee and milk, so that the special properties of coffee and milk are highlighted, and completely integrated together to complement each other.

(1) place the steam pipe at the center of the steel cup, 45 degrees to the upper right and at a depth of about 1 cm near the edge of the cup.

(2) turn on the steam pipe, move the steel cup down slowly, and roll the milk up and down and slowly let the volume expand.

(3) when the foam expands to eight minutes full, move the steam pipe obliquely to the right side of the center point of the steel cup near the edge of the steel cup, so that the milk bubble rolls in a vortex way.

(4) Control the angle and depth of the steel cup to involve the thicker milk foam and stop beating to the desired temperature.

Make love at the same time

(1) place the steam pipe at the center of the steel cup, 45 degrees to the right and at the edge of the cup, at a depth of about 1 cm.

(2) turn on the steam pipe, the steel cup moves down slowly, and the milk rotates in a swirling manner.

(3) Control the angle and moving speed of the steel cup to keep the milk turning in a vortex, and let the volume expand to nine minutes full.

(4) stop moving the steel cup to deepen the depth of the steam pipe and control the milk bubble to beat to the desired temperature.

0