Coffee review

Introduction of cleaning method manual for descaling steps of Delong coffee machine

Published: 2024-06-02 Author: World Gafei
Last Updated: 2024/06/02, Delong coffee machine descaling step cleaning instructions 1. When cleaning the coffee dregs receiving box, it must be emptied first. 2. The water tank of Delong coffee machine needs to be cleaned regularly. 3. The water level indicator buoy is red, which can show the water storage inside the drip tray. When the water level indicator buoy is clearly visible, needles can be used to dredge it. 4. Use it regularly

Introduction of cleaning method manual for descaling steps of Delong coffee machine

1. When cleaning the coffee residue receptacle, it must be emptied first.

2. The water tank of Delong coffee machine needs to be cleaned regularly.

3. The water level indicator buoy is red, which can show the water storage inside the drip tray. When the water level indicator buoy is clearly visible, needles can be used to dredge it.

4. Use sponge to clean Delong coffee machine nozzle regularly.

Cleaning of extraction part of Delong Coffee Machine

When cleaning the extraction part of the Delon coffee machine, turn off the machine first, do not unplug the power supply at this time, and wait for all the lights to go off. Then, open the outer cover of the extraction part of the coffee machine, take out the dripping plate and engage with the coffee grounds, and press the red release buttons on both sides of the extraction part to remove it.

It should be noted that the extraction part of the Delon coffee machine can only be taken out when the machine is turned off, and it will damage the coffee machine when the machine is turned on.

Wash the extraction part with clean water without preparation, do not wash it in the dishwasher, carefully clean the inside of the coffee machine, remove the coffee residue inside the machine, you can use a wood or plastic fork for auxiliary cleaning, at the same time, you can also use a vacuum cleaner to absorb coffee residue.

After cleaning, when reinstalling, slide on the bracket to install the extraction part and press the "PUSH" key at the bottom until the clamping sound is heard. Check again whether the red release button is ejected correctly, otherwise the extraction part of the outer cover cannot be closed. Then install the dripping tray and the coffee dregs holding box, and then close the outer cover of the extraction part.

1. Turn off the machine by pressing the control panel power on key

two。 Open the outer cover of the extraction part of the coffee machine, take out the dripping plate and join the coffee grounds, and press the red release buttons on both sides of the extraction part to remove it. Note: the extraction part can only be removed when the machine is turned off. Forcibly removing the machine when the machine is turned on will damage the coffee machine >

3. Please clean the extraction part with clean water without preparation, do not wash it in the dishwasher, carefully clean the inside of the coffee machine, remove the coffee residue inside the machine, and use a wood or plastic fork for auxiliary cleaning. at the same time, you can also use a vacuum cleaner to absorb coffee residue.

4. After cleaning, when reinstalling, slide on the bracket to install the extraction part and press the "PUSH" key at the bottom until the clamping sound is heard. Then check to see if the red release button ejects correctly.

5. Install drip tray and coffee dregs container, then close the outer cover of the extraction part.

0