Coffee review

Introduction to the characteristics of the production area of the maintenance method of water leakage during self-cleaning of Xike coffee machine

Published: 2024-11-08 Author: World Gafei
Last Updated: 2024/11/08, Xike coffee machine self-cleaning leakage maintenance method production area characteristics of the extractor can not be taken out, observe the extractor at the top. One drink, two drinks, newspaper Changliang. After entering the functional test mode, the extractor can move up, but not down. after inspection, the extractor motor is broken, replace the motor and troubleshoot. The normal voltage at both ends of the motor, when moving up, F8 is

Introduction to the characteristics of the production area of the maintenance method of water leakage during self-cleaning of Xike coffee machine

The extractor can not be taken out, so observe that the extractor is at the top. One drink, two drinks, newspaper Changliang.

After entering the functional test mode, the extractor can move up, but not down. after inspection, the extractor motor is broken, replace the motor and troubleshoot.

The voltage at both ends of the motor is normal. When moving up, F8 is positive, F7 is negative, and the voltage value is 200V. After reaching the top, the voltage disappears and 1 cup light is on. When the 2-cup key is pressed, the extraction part walks downwards, F8 is negative voltage, F7 is positive voltage, and the voltage value is 200V. After reaching the bottom, the voltage disappears and the 2-cup lamp is on.

SAECO coffee machine automatic SAECO coffee machine fault summary table (the following faults are common, the master maintenance experience summed up the following items, only for reference, such as debugging or not, it may be necessary to ask the master to check, specific problems, specific analysis. Call for consultation or report for repair, SAECO coffee machine for repair Tel:)

1 SAECO Coffee Machine Coffee 3000 Coffee 4000 Series SAECO Coffee Machine after turning on, the warning light is always on and the machine is not working.

After entering the test mode, start the motor, the motor has a slight action, but does not work. After inspection, the bridge stack (rectifier bridge) on the circuit board is damaged, replace the bridge stack, troubleshooting

Happy guest SAECO coffee machine red light is always on

Reason: lack of water or coffee beans.

Solution: turn off the phone first, then add water and coffee beans, and then turn it back on. If the red light is still on and the water beans are available, spin steaming

Steam hot water knob holds steam column tube.

0