Coffee review

How to make coffee in a mocha pot-The difference between a mocha pot and a coffee machine

Published: 2024-11-18 Author: World Gafei
Last Updated: 2024/11/18, Mocha pot how to make coffee-the difference between mocha pot and coffee machine 1, water level: use warm water, the water level is 0.5 cm below the safety valve position. The safety valve will automatically relieve pressure when the pressure of the lower pot is too high to prevent safety accidents. If the water level is higher than the safety valve, the role of the safety valve cannot be played normally. 2, coffee powder: coffee powder with medium and fine particle size, filled with powder tank, powder

How does a mocha pot make coffee-the difference between a mocha pot and a coffee maker

1. Water level: use warm water and the water level is 0.5 cm below the safety valve. The safety valve will automatically relieve pressure when the lower pot pressure is too high, in order to prevent safety accidents. If the water level is higher than the safety valve, the function of the safety valve can not play normally.

2. Coffee powder: coffee powder is medium-fine-grained and filled with powder trough. when filling the powder, vibrate the powder trough properly so that the coffee powder is evenly distributed. after filling it, gently press the surface with your fingers to make the powder denser.

Process analysis:

1. Initial heat: after the kettle is heated, the air part expands by heat, resulting in pressure, and the water reaches the powder trough through the aqueduct. After soaking in water, the coffee powder expands rapidly to form pressed powder. At this time, the water in the lower pot is resisted by pressed powder, and the closed pressure in the lower pot continues to increase. The purpose of the first heat is to raise the water level to the position of the powder trough and let the coffee powder form cakes, so there is no need for high pressure and high temperature, as long as the heat is low. If you open the lid of the upper pot to observe, a small amount of coffee will flow out, and then the coffee will no longer flow out.

2. Pressurization: after the coffee cakes in the powder trough, the pressure in the lower pot begins to increase, turn the fire to medium heat, and let the pressure continue to increase.

3. Extraction: fire. The pressure of the lower pot is increased to balance with the resistance of the coffee pressed powder, turn on the fire, and let the pressure exceed the critical point of this balance. Under the action of the continuous fire, let the water quickly pass through the coffee pressed powder to get the coffee liquid with complete extraction and balanced taste.

4. Raise the pot: turn off the fire. Turn off the fire as soon as there is a steam purr in the upper pot of coffee. Then let the coffee pot stand for about 30 seconds. There is a proper distance between the aqueduct of the lower pot and the base of the lower pot, and if you continue to heat, there is still hot water passing through the powder trough, and the extracted coffee has a residual smell of coffee; in addition, if you shake the lower pot, the pressure of the lower pot will increase intermittently, or because the water level of the lower pot is not balanced, there is still water passing through the powder trough. Both reasons cause coffee to be overextracted or overheated.

0