After-sales maintenance of the common failure manual of Xike coffee machine

After-sales maintenance of the common failure manual of Xike coffee machine

one。 When the coffee machine cannot be turned on, the reason may be that the power is not turned on, the coffee machine is on standby, or the power is not plugged in. The solutions are as follows: 1. Turn on the power switch .2. Reseat the power plug. 3. Press the coffee button to restart the machine.

two。 When making coffee is not hot, the reason is that the coffee cup is too cold. The solution is to warm the coffee cup.

three。 Hot water or steam cannot be output because the output pipe is blocked. Solution: turn on the output tube with a needle.

four。 Coffee has too little CREMA because the beans are not freshly roasted or improperly mixed. The solution changes the mix.

five。 The heating time of the machine is too long and the flow rate of hot water output is very small, the reason is that there is too much scale inside the coffee machine. The solution is given to the machine for scale removal.

six。 The coffee maker brewer cannot be removed because the brewer is not in the initial position or the dregs trough is not removed. The solution: 1. Put all the accessories in place and open the machine, and the brewer will automatically return to its original position. two。 Take out the bean dregs tank before taking out the brewing machine.

seven。 The bean grinder works but does not output coffee for the following reasons: 1. The water tank is short of water, the brewer is blocked, the pipeline in the machine is not filled, the machine is automatically adjusting the amount of powder, hot water and steam knobs are not in the correct position. The solutions are as follows: 1. Add water and fill the inner line of the machine. two。 Clean the brewer. 3. Filling machine internal pipeline 4. Make some coffee. 5. Adjust the knob.

eight。 The reason for the weak output of coffee is that the machine is automatically adjusting the powder quantity solution: make a few cups of coffee.

nine。 The reason for the slow output of coffee is that the powder is too fine. The solution is to adjust the bean grinder reason 2. Solution to the shortage of water inside the machine: fill the internal pipeline of the machine. Reason 3. The solution to the blockage of the brewer: clean the brewer.

ten。 The reason why coffee export can not export coffee normally is that coffee export is blocked. The solution is clean coffee export.

eleven。 The reason why the coffee making process cannot be carried out is that the bean trough cover is not covered properly. Solution: cover the bean trough correctly and press the coffee button again.

1. The machine is not connected to the power supply; solution: connect the machine to the power supply

two。 The solution is that the plug is not inserted into the Jack on the back of the machine: insert the plug into the power Jack of the machine

3. The machine is in standby mode the solution: press the bubble button to start the machine.

b. The coffee is not hot enough:

1. Coffee cups are the cold solution: heat coffee cups with hot water

c. Reasons for not distributing hot water or steam

Hot water rod nozzle is blocked; solution: use a needle to clean hot water / steam nozzle