Nav: Home > Coffee Supplies >

Coffee machine how to disassemble the water distribution network cleaning steps Video Coffee Machine head removal

Published: 2024-09-17 Author: World Gafei

Last Updated: 2024/09/17, How to disassemble and clean the coffee machine water distribution net Video Coffee machine head disassembling and cleaning leaking screen and filter should be soaked in water for a period of time before washing with water, both sides should be rinsed back and forth, do not scrape with harder objects, that will damage the filter. When cleaning the coffee pot, do not put the pot directly into the water. Take out the strainer and filter for cleaning, and scrub the rest with a clean soft cloth.

Coffee machine water separation net how to disassemble cleaning steps video coffee machine brewing head disassembly

When cleaning the leakage net and filter net, you should first soak in water for a period of time and then rinse with water. Both sides should be washed back and forth. Do not use harder objects to scrape, which will damage the filter net. When cleaning the coffee pot, do not put the pot directly into the water, to take out the filter, filter cleaning, other with a clean soft cloth can be wiped, after cleaning with a dry cloth, so that the coffee machine is clean, is not very simple.

1. Remove the metal coffee filter from the coffee machine handle, and then install the blind bowl (reverse cleaning bowl) into the coffee handle. If there is no blind bowl, there must be a rubber blind pad when buying the coffee machine. You can also put the rubber blind pad directly into the metal coffee filter. Remember that the side with obvious protrusions faces upward.

2. If you wash daily, take 1 scoop of cleaning powder; if you don't wash often, take 2 tablespoons and put them in a blind bowl or on a rubber blind pad.

3. Don't rush to buckle the handle of the coffee machine, press the brewing button of the coffee machine, and clean the water separation net with the coffee machine while the brewing head is working. The reason for this is to prevent too much fine coffee powder from entering the interior of the coffee machine during the subsequent backwashing process. Brush to no water with coffee grounds, you can turn off the brewing button.

4. Button on the handle, press the brew button of the coffee machine, run for about 10 seconds, then turn off for 10 seconds, so that the detergent is fully dissolved. Open 10 seconds, close 10 seconds, once; repeat 4-5 times, close the coffee brewing button.

5. Remove the handle and clean it, buckle it into the coffee machine again, press the brewing button of the coffee machine, run for 5 seconds, turn off for 2 seconds, repeat 7-10 times to ensure sufficient cleaning.

6. Remove the handle and use the cleaning brush again to brew the inner card groove of the head to avoid residual coffee grounds and cleaning powder.