Coffee grinder maintenance mode-hand coffee grinder which is better

Coffee grinder maintenance mode-hand coffee grinder which is better

Close the shutter at the bottom of the bean warehouse and grind the remaining coffee beans. In this step, you must grind off all the remaining coffee beans as much as possible to ensure that there is no coffee bean residue on the bottom of the bin and on the grinding blade.

two

Turn off the switch.

three

Take off the bean barn.

four

Remove the coffee beans from the warehouse and put them in a sealed bag. Be sure to put the unground coffee beans in a sealed bag and store them in a cool, dark place to keep them fresh. Never put coffee beans in the refrigerator.

five

If this is a manual measuring machine, you need to clean the grinding blade with a knife. This step is the most important because you will clean the coffee powder left in the whole grinder. You will need a special grinder to thoroughly grind the inside of the machine (never use a toilet hammer! ). The razor should be located above the grinding blade and just seal the interface connecting the bean warehouse. Be sure to clean up the coffee powder, or it will be everywhere. With this step, you can clean up the tiny coffee powder involved in the coffee machine. After that, you need to put the bean barn back, leave the grinder idling for a few seconds, and repeat this step until the coffee machine is thoroughly cleaned.

Among them, ultra-fine coffee powder is the main reason why you have to clean the grinder. Because these coffee powders are very small, the faster they are exposed to oxygen and heat. At the same time, these fine powders are mixed with oil and stick in the grinder. Over time, the coffee powder stuck in the grinder will form a shell, which will give the later coffee powder a roasted peanut flavor. I bet all unwashed coffee mills grind coffee with this flavor. I assume for a moment that you have not experienced the same experience. As long as you clean the grinder regularly, you can get rid of this boring taste completely.

1. Read the product specification in detail and understand the product structure

2. Prepare neutral detergent and soft cloth

3. If possible, you'd better prepare another cleaning brush.

4. Make sure the coffee grinder is off.

5. Plug-in coffee bean grinder to achieve mechanical and electrical separation

6. Dilute the neutral detergent with a small amount of water

7. Use a soft brush to clean the residue in the corners of the coffee grinder.

8. Dip the detergent on the soft cloth and twist the soft cloth to a damp dry state

9. Use a damp-dry soft cloth to wipe the inside of the bean grinder

10. Clean the inside and outside of the bean grinder after washing the soft cloth.

11. Wipe the detergent attached inside and outside the coffee grinder with clean water

12. Dry the coffee grinder with a dry cloth

13. Place the cleaned coffee grinder in a cool, light-proof and ventilated environment to dry thoroughly.