Saeco Coffee Machine Fault Code-Hickey Coffee Machine Common failure Diagram

Saeco Coffee Machine Fault Code-Hickey Coffee Machine Common failure Diagram

In the first case, the coffee grounds fell somewhere imperceptible (not cleaned up).

In the second case, inside the coffee machine is a counting machine, and a sensor, which is used to record the amount of coffee grounds; maybe you haven't done something right. Or the slag box induction microswitch is stuck.

Solution: it is recommended that in the boot state, take out the waste box for more than 15 seconds and then put it in. This is a counter theory, and the shutdown state is unrecognizable. If it still doesn't work, most of the fretting switch is stuck, and the device is used to help restore it in the power-on state.

Solution: if you want to remove the dirt yourself, please use a special detergent for the coffee machine. Be careful! It is forbidden to use vinegar for cleaning.

Coffee is too slow or difficult to produce:

Coffee powder is too coarse or too fine, adjust the coarse and fine degree of grinding properly

Italian Xike Royal series automatic coffee machine Royalcappuccino maintenance and sale, Italian Xike automatic coffee machine Vera / Villa maintenance and sale, Italian Xike automatic coffee machine OdeaGo maintenance and sales, 0Saeco Italian Xike automatic coffee machine OdeaGiro

Saeco maintenance and sales, Italian Philips automatic espresso machine X-small maintenance and sales, SaecoRoyalCappuccino coffee machine maintenance and sales services.

Cause: scale is caused by metal substances in water; descaling is necessary when the temperature decreases after 4-6 months of use or when the water flow is found to be reduced.