Coffee review

How did the water tray of Merlot's automatic coffee machine get into the coffee powder?

Published: 2024-11-05 Author: World Gafei
Last Updated: 2024/11/05, Merlot automatic coffee machine water plate how to get into the coffee powder one. First of all, select the cleaning and maintenance secondary menu. two。 Turn the knob until the integrated descaling program is highlighted, and then press the knob to confirm your choice. three。 Turn the knob until it starts to be highlighted, then press the knob to start the descaling procedure, and a prompt for emptying the container and water tray appears on the display. four

How did the water tray of Merlot's automatic coffee machine get into the coffee powder?

one。 First select the "cleaning and maintenance" sub-menu.

two。 Turn the knob until the Integrated descaling Program is highlighted, and then press the knob to confirm your choice.

three。 Turn the knob until "start" is highlighted, then press the knob to start the descaling program, and the prompt "empty the container and water tray" appears on the display.

four。 Empty the coffee maker water tray and waste box, and then reload them into the coffee maker. A "move water tank" prompt appears on the display screen.

five。 Lift the lid of the water tank and pull it up out of the coffee machine. If you are using a water filter, remove it from the tank, pour warm water into the tank until the water level reaches the 0.5 liter mark, then add detergent powder to stir. After the detergent powder dissolves, reload the water tank into the coffee maker.

Try to choose professional detergent for cleaning, so that it will not cause damage to the machine, the decontamination effect is good, and it is relatively safe.

If there is no cleaning detergent, try mixing one part of white vinegar with six portions of clear water, which can also be used instead of professional detergent or citric acid.

Add 2 cups of water to the water tank, then add 50ml vinegar and then drip a cup according to the coffee-making procedure, let it stand for 20 minutes, then start to clean all the water in the water tank, turn off the machine for 5 minutes, then re-operate it with clean water for 1-2 times. Clean the leaky screen and filter screen, soak in water for a period of time, then rinse with water, rinse back and forth on the opposite side, and be careful not to scrape with hard objects.

The effect of cleaning should be carefully observed, mainly to observe the color of the effluent and the pressure of the steam. If the effluent is clear and the pressure is in place, then it is cleaned.

0