Saeco Coffee Machine extraction Fast-saeco Coffee Machine Fault Code

Saeco Coffee Machine extraction Fast-saeco Coffee Machine Fault Code

1. Place a container at the bottom of hot water and steam nozzles, then press the hot water key, and the indicator will light up.

2. Turn the hot water and steam knob on the mark and rotate it in the triangle position.

3. Steam will flow out from hot water and steam nozzles later. Then turn the hot water and steam knob on the mark and rotate it in the triangle position.

4. Press the hot water keyboard indicator to turn off, take away the container, and the coffee maker is ready to use.

The bean grinder works but does not output coffee for the following reasons: 1. The water tank is short of water, the brewer is blocked, the pipeline in the machine is not filled, the machine is automatically adjusting the amount of powder, hot water and steam knobs are not in the correct position. The solutions are as follows: 1. Add water and fill the inner line of the machine. two。 Clean the brewer. 3. Filling machine internal pipeline 4. Make some coffee. 5. Adjust the knob.

. The reason for the weak output of coffee is that the machine is automatically adjusting the powder quantity solution: make a few cups of coffee.

. The reason for the slow output of coffee is that the powder is too fine. The solution is to adjust the bean grinder reason 2. Solution to the shortage of water inside the machine: fill the internal pipeline of the machine. Reason 3. The solution to the blockage of the brewer: clean the brewer.

The reason why coffee export can not export coffee normally is that coffee export is blocked. The solution is clean coffee export.

. The reason why the coffee making process cannot be carried out is that the bean trough cover is not covered properly. Solution: cover the bean trough correctly and press the coffee button again.