Bean mill adjustment scale-Pegasus bean mill adjustment scale

Bean mill adjustment scale-Pegasus bean mill adjustment scale

To observe the coffee powder, the high-quality coffee powder should be powdered and gravel. If the coffee powder is soft, like flour, it means the powder is fine. On the contrary, if the coffee powder feels tough and rough, it means the powder is too coarse.

Different bean grinders have different adjustment dials, so you should check the model of the coffee grinder and read the instructions carefully to determine the direction and strength of the dial. In general, if you keep in the habit of checking the settings of the bean grinder, you only need to make very small adjustments. As long as you move the turntable within 3 mm, you can change the thickness of the powder. Although 3 mm is a very small number, the grinding time of the same coffee beans will change by 3-5 seconds.

Specific operation steps

Determine the direction of adjustment you need (finer or thicker). Make sure there are enough coffee beans in the warehouse, and the valve between the warehouse and the sharpening knife is opened so that the coffee beans can fall smoothly into the grinding area.

Turn on the grinder for 10 seconds and discard the coffee powder (these are coffee powders that have not been adjusted).

Use the coffee powder to make a cup of coffee to ensure the accuracy of the steps of serving, flattening and pressing powder. Test the quality of the coffee and the extraction time. Constantly adjust the dial to make the powder reach a perfect thickness.

The scale is just a reference, different brands have different grinding scales, and the performance of the same model bean grinder of the same brand under the same scale is not exactly the same. it is better to understand it this way: the scale just tells you which direction is thick and which is fine. when you find a suitable powder thickness, the role of the scale will show a little bit. The premise is that only your bean grinder, and can not change the beans, the amount of powder does not change, the strength of the powder can not be changed.

Remember a little trick: when you find the right powder thickness, twist it with your hand from time to time, pinch it, feel it with your body and write it down as much as possible, so that even if you change the bean grinder, you don't have to rely solely on the scale to judge. If you pinch it with your hand, it will be significantly thicker, which can greatly improve your efficiency.