Introduction to the video procedure of how to dilute the descaling solution of Delong coffee machine

Introduction to the video procedure of how to dilute the descaling solution of Delong coffee machine

Wash the extraction part with clean water without preparation, do not wash it in the dishwasher, carefully clean the inside of the coffee machine, remove the coffee residue inside the machine, you can use a wood or plastic fork for auxiliary cleaning, at the same time, you can also use a vacuum cleaner to absorb coffee residue.

After cleaning, when reinstalling, slide on the bracket to install the extraction part and press the "PUSH" key at the bottom until the clamping sound is heard. Check again whether the red release button is ejected correctly, otherwise the extraction part of the outer cover cannot be closed. Then install the dripping tray and the coffee dregs holding box, and then close the outer cover of the extraction part.

1. Place a container under the milk foamer, rotate the steam knob to the "I" position and release hot water for a few seconds. Then rotate the steam to the "0" position and stop releasing hot water.

two。 Wait a few minutes for the milk foamer to cool. One hand grabs the tube of the milk foamer, the other turns the milk foamer counterclockwise, and then pulls down the milk foamer.

3. Go down and blue drive down the steam nozzle.

4. Make sure the two small holes pointed to by the arrow are not blocked. If necessary, use a pin to clean.

5. Clean all parts of the milk foamer with sponge and warm water.

6. Put the steam nozzle and milk foamer back to the original flavor and push it up until it doesn't work.