Coffee review

Manual coffee grinder how to adjust the thickness scale is more appropriate

Published: 2024-11-02 Author: World Gafei
Last Updated: 2024/11/02, Manual coffee grinder how to adjust the thickness scale is more appropriate 1, whether the middle shaft of the bean grinder is stable when you rotate, will you swing left and right? if it is very stable, the thickness will be relatively uniform. 2. The ground powder particles, you can take a look at the uniform degree of thickness, the more uniform the better, 3, drop, in fact, it is not necessary, just to roughly judge the overall material.

Manual coffee grinder how to adjust the thickness scale is more appropriate

1. Is the middle shaft of the bean grinder stable when you rotate? will it sway left and right? if it is very stable, the thickness will be relatively uniform.

2. For the ground powder particles, you can take a look at the evenness of thickness and thickness. The more uniform the better.

3. Fall, in fact, it is not necessary, just to roughly judge the overall material and texture

Because of its grinding disc characteristics, it is easy to grind unevenly.

It is easier to produce a large amount of heat, which aggravates the loss of coffee aroma, which also leads to the easy emission of coffee gas when the hand grinder is grinding.

The efficiency is too low, believe it or not, China Coffee Network believes anyway. This is the biggest problem for China Coffee Network. If I want to make a cup of coffee, if I use 20 grams of coffee beans to grind, the grinding time can be as long as 5 minutes. When shaking, your hands will still get sore. Of course, if you take this as a way of exercise, the hand grinder is quite suitable for you.

The wood base is easy to break, and the grinding plate above the hand bean grinder is fixed on the wood base with screws. After using it for a long time, the hole in the screw will become bigger and bigger, so that the bean grinder cannot be used. The solution is to remove the grinding part of the hand bean grinder, and then screw the screw to the base in another place.

0