Coffee machine descaling steps Esam3200 coffee machine calcium removal program illustration

For professional baristas, please follow the coffee workshop (Wechat official account cafe_style)

Explanation of Esam3200 calcium removal program

When the calcium removal warning light is on (figure 1), this machine can still extract coffee, but it is recommended to remove calcium to ensure the best flavor of coffee.

The steps of calcium removal are as follows:

1. Turn on the power button and turn it on.

two。 Wait for the single cup and double cup keys green LED to stay on.

3. Pour the calcium remover into the tank, then add 1500C.C water.

4. Put the container on the right hand side (at least 1500C.C) under the foam tube.

(figure 1)

5. Press and hold the calcium removal lamp button until the green indicator lights of single cup and double cup keys go out, then let go.

6. Turn the counterclockwise needle on the steam knob, and the decalcification water will be left from the foam tube to the lower container.

7. At this time, the caffeine machine has entered the automatic calcium removal sequence.

8. Wait about 40 minutes after the water tank is drained, the warning light of the water tank is on, and the red light is on.

After pumping out the water tank and cleaning it with clean water, pour the water under the bubble tube into the square container.

Drop it.

9. Then add 1500 C.C of clean water to the water tank and put it back into the water tank and milk bubble tube.

The lower container will automatically continue to drain and enter the second cleaning procedure.

10. The second cleaning sequence the hot water will not stop, when the water is drained, the water tank warns.

Turn off the steam knob clockwise when the red light is on.

11. At this point, the calcium removal sequence has been completed, and then add clean water to the water tank.