Coffee review

The correct use of siphon pots has nothing to do with siphon principles.

Published: 2024-11-08 Author: World Gafei
Last Updated: 2024/11/08, Professional coffee knowledge exchange More coffee bean information Please pay attention to coffee workshop (Weixin Official Accounts cafe_style) Syphon pot (Syphon) commonly known as glass ball or siphon type, is a simple and easy to use coffee brewing method, but also one of the most popular coffee brewing methods in cafes. Although siphon pot has siphon alias, it has nothing to do with siphon principle, but is produced after heating water.

Professional coffee knowledge exchange more coffee bean information please follow the coffee workshop (Wechat official account cafe_style)

Siphon pot (Syphon), commonly known as "glass ball" or "siphon", is a simple and easy-to-use method of coffee brewing, and it is also one of the most popular coffee brewing methods in cafes. Although the siphon kettle has the nickname of "siphon", it has nothing to do with the siphon principle, but uses water heating to produce water vapor, causing hot expansion and cold contraction, pushing the hot water from the lower sphere to the upper pot, and then sucking back the water from the upper pot after the lower pot cools. Does that sound mysterious? Not at all. Follow the following steps and you will understand!

Prepare supplies:

A set of siphon pots (this article uses Japanese Hario Technica-2, that is, TCA-2), industrial alcohol, lighters, bamboo spoons for mixing, wrung wet rags

First, fill the water-hook the filter element

Fill the pot with hot water to the "two cups" icon mark. Put the filter element into the upper pot, hold the end of the iron smelter with your hand, and gently hook it to the end of the glass tube. Be careful not to release the hook suddenly, so as not to damage the glass tube of the upper pot.

Second, ignite-insert the pot diagonally-waiting for big bubbles

Light the alcohol lamp and insert the upper pot obliquely so that the rubber edge is pressed against the spout of the next pot (rest assured that the upper pot will not fall) so that the iron smelter is soaked in the water of the next pot. Then boil the water and wait for the pot to produce continuous bubbles.

Third, upright-insert it into the upper pot

When large bubbles appear continuously in the lower pot, straighten the upper pot, shake it left and right and press it down slightly so that it is gently stuffed into the lower pot. After the upper pot is plugged in, you can see that the water in the next pot begins to climb up. If you have a bean grinder, you can start grinding beans now! Two cups of water use a medium grinding scale of three spoonfuls of coffee (about 24g)

Straighten and tuck it into the upper pot

The water began to rise

Fourth, let the water in the lower pot rise completely to the upper pot.

After the water has completely risen to the pot, don't worry, wait a few seconds, and then prepare to pour in the coffee powder after the bubbles in the pot decrease a little.

From top to bottom: the hot water in the pot is gradually running up.

Fifth, pour in the coffee powder-stir (left and right)

Pour in the ground coffee powder and move it around with a bamboo spoon to evenly remove the coffee powder into the water. The timing starts at the same time as the first stirring.

Stir gently to avoid violent stirring. If it is fresh coffee powder, it will float on the surface to form a layer of powder. At this time, the coffee powder needs to be stirred so that the flavor of the coffee can be completely extracted. The correct stirring action is to move the bamboo spoon in the left and right direction, with a "strong way" of downward pressure, to "press" the coffee powder floating on the surface of the water below the surface.

6. Stir twice more.-flameout

After the first stirring, time 30 seconds, make the second stirring, and then time 20 seconds for the final stirring-- the alcohol lamp can be removed. Take the pre-prepared (wrung-dry) slightly wet dishcloth and gently wrap the side of the lower pot from the side to prevent the wet cloth from touching the place where the alcohol flame at the bottom of the pot comes into contact, so as to prevent the pot from breaking. At this time, you can see that the water in the upper pot is quickly "pulled" to the lower pot. If your coffee is fresh enough, there will be a lot of light brown foam in the pot.

VII. Completion

After the coffee is sucked into the lower pot, hold the upper pot in one hand and the handle of the lower pot in the other, gently shake the upper pot to the left and right to pull out the upper pot and the lower pot. Pour the coffee into a warm coffee cup and enjoy the mellow coffee that you have prepared by hand.

Unplug the upper pot

Pour out the coffee

Enjoy

Postscript: tips for using siphon pots

If there is air conditioning in the room to cause air convection, it will make the alcohol lamp flames swing from side to side. At this point, an empty shell of a CD record can be used as a good windshield.

0