Coffee review

Introduction to the description method of brand taste and flavor of how to adjust the thickness of single bean grinder

Published: 2024-09-20 Author: World Gafei
Last Updated: 2024/09/20, How to adjust the thickness of the single bean grinder the description method of brand taste and flavor introduces the method of removing the dial and screwing off the nut in the picture above clockwise. Take off two gaskets (one with a handle) and turn the grinding core: turning clockwise is thickening and counterclockwise is fine. Be careful not to adjust too much. This is a rough tune. And install it. The nut is tightened counterclockwise. It must be tightened.

Introduction to the description method of brand taste and flavor of how to adjust the thickness of single bean grinder

Remove the dial and screw off the nut shown above clockwise. Take off two gaskets (one with a handle) and turn the grinding core: turning clockwise is thickening and counterclockwise is fine. Be careful not to adjust too much. This is a rough tune. And install it. The nut is tightened counterclockwise. It has to be tight. Usually make espresso with a scale between 8 and 12. Of course, you can adjust it to between 2 and 5. Then, when the scale is 25, you may grind the hand punch and the French pressing powder. If it's not thick enough, adjust it outside the scale. These two methods can basically solve the problem of coffee powder thickness of Huijia ZD-15 bean grinder. Chen Lei himself has encountered these problems, and Chen Lei has been entangled for a long time. Chen Lei sorted out the problem this time, hoping to help his friends with this problem. The symptom is that even if the bean grinder is installed correctly. But the thickness of the powder still can not meet their own requirements, for example: the powder is adjusted to the minimum, it is still not fine enough, or the powder is adjusted to the thickest, not thick enough. The solution to this problem is as follows: after the Huijia ZD-15 bean grinder is bought, many friends will encounter the problem of the wrong thickness of the powder. Chen Lei also encountered it, and now he has three Huijia ZD-15 bean grinders. If adjusted to the same scale ground coffee powder thickness is different, for example: the same scale 10, but there is thick, there is fine.

Another situation is that when the scale is set to 1 or 25, the coffee powder from the coffee beans is of the same thickness. The reason is that the grinding plate of the bean grinder is not installed correctly, which may not be installed correctly at the time of leaving the factory. It may also be caused by the failure to install the bean grinder correctly after we have taken apart the bean mill. The solution is as follows:

0